彈簧墊圈 計算 BS EN 16984 (EN 16984) - 2016
适用範圍
标準規定了碟形彈簧（包括單碟彈簧及疊堆組合碟形彈簧）的設計準則與結構特征，涵蓋了相關術語的定義、設計計算公式以及此類彈簧的疲勞壽命評估方法。
注：技術數據僅供參考，請以官方原件為準！
類似标準及供貨信息
| 1 | [國标] GB /T 1231 (Specifications) - 2024 |
鋼結構用高強度大六角頭螺栓、 大六角螺母、墊圈技術條件 Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures |
|
| 2 | [國标] GB /T 43655 - 2024 |
自攻螺釘連接 底孔直徑和擰緊扭矩技術條件 Self-tappingscrew connections - Specification ofthepilotholediameterand tighteningtorque |
|
| 3 | [國标] GB /T 41487 - 2022 |
複合型密封墊片材料 Composite sealing gasket material |
|
| 4 | [國标] GB /T 20118 - 2017 |
鋼絲繩通用技術條件 Steel wire ropes for general purposes |
|
| 5 | [國标] GB /T 94.4 - 2017 |
彈性墊圈技術條件 錐形彈性墊圈 Specifications for spring washers - Conical spring washers |
|
| 6 | [國标] GB /T 959.1 - 2017 |
擋圈技術條件 - 彈性擋圈 Specifications for retaining rings-Circlips |
|
| 7 | [國标] GB /T 23934 - 2015 |
熱卷圓柱螺旋壓縮彈簧 技術條件 Hot formed helical compression springs - Technical Requirement |
|
| 8 | [國标] GB /T 32076.1 - 2015 |
預載荷高強度栓接結構連接副 第1部分：通用要求 High-strength structural bolting assemblies for preloading - Part 1: General requirements |
|
| 9 | [國标] GB /T 1239.1 - 2009 |
冷卷圓柱螺旋彈簧技術條件 第1部分：拉伸彈簧 Cold coiled helical springs technical specifications - Part 1: Extension spring |
|
| 10 | [國标] GB /T 1239.2 - 2009 |
冷卷圓柱螺旋彈簧技術條件 第2部分：壓縮彈簧 Cold coiled helical springs technical specifications - Part 2: Compressions spring |
|
| 11 | [國标] GB /T 24425.6 - 2009 |
鋼絲螺套技術條件 Specification For Wire Thread Inserts |
|
| 12 | [國标] GB /T 13384 - 2008 |
機電產品包裝通用技術條件 General specifications for packing of mechanical and electrical product |
|
| 13 | [國标] GB /T 1568 - 2008 |
鍵的技術要求 |
|
| 14 |
|
[國标] GB /T 16938 - 2008 |
緊固件 螺栓、螺釘、螺柱和螺母通用技術條件 Fasteners - General requirements for bolts,screws,studs and nuts |
| 15 | [國标] GB /T 3765 - 2008 |
卡套式管接頭技術條件 24° Cone Connectors - Specification |
|
| 16 | [國标] GB /T 5653 - 2008 |
擴口式管接頭技術條件 Flared couplings - Specification |
|
| 17 | [國标] GB /T 9130 - 2007 |
鋼制管法蘭用金屬環墊 技術條件 Specification of metallic ring-joint gaskets for steel pipe flanges |
|
| 18 | [國标] GB /T 1231 - 2006 |
鋼結構用大六角螺栓、螺母、墊圈的技術要求 Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures |
|
| 19 |
|
[國标] GB /T 3934 - 2003 |
普通螺紋量規 技術條件 Specification of gauges for general purpose screw threads |
| 20 | [國标] GB /T 90.2 - 2002 |
緊固件 标志與包裝 Fasteners - Marking and packaging |
|
| 21 |
|
[國标] GB /T 5286 - 2001 |
螺栓、螺釘和螺母用平墊圈 總方案 Plain Washers for Bolts, Screws and Nuts - General Plan |
| 22 | [國标] GB /T 5779.1 - 2000 |
緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求 Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements |
|
| 23 | [國标] GB /T 5779.2 - 2000 |
緊固件表面缺陷 - 螺母 Fasteners-Surface discontinuities - Nuts |
|
| 24 | [國标] GB /T 5779.3 - 2000 |
緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求 Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements |
|
| 25 |
|
[國标] GB /T 17880.6 - 1999 |
鉚螺母技術條件 |
| 26 | [國标] GB /T 548 - 1996 |
錨技術條件 Technical requirements for anchors |
|
| 27 | [國标] GB /T 15855.3 - 1995 |
擊芯鉚釘技術條件 Specifications For Drive Rivets |
|
| 28 | [國标] GB /T 3633 - 1995 |
鋼結構用扭剪型高強度螺栓連接副技術條件 Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures |
|
| 29 | [國标] GB /T 2259 - 1991 |
機床夾具零件及部件技術要求 Specifications for parts and units of jigs and fixtures |
|
| 30 | [國标] GB /T 1159 - 1989 |
油杯技術條件 Grease nipples and lubricating cups technical specification |
|
| 31 | [國标] GB /T 1163 - 1989 |
油标技術條件 Oil level indicators technical specification |
|
| 32 |
|
[國标] GB /T 152.3 - 1988 |
圓柱頭用沉孔 Counterbores for hexagon socket head and slotted cheese head screws |
| 33 | [國标] GB 943 - 1988 |
自鎖螺母技術條件 Procurement Specification For Self-Locking Nuts |
|
| 34 | [國标] GB 98 - 1988 |
止動墊圈技術條件 Specification for tab washer |
|
| 35 |
|
[國标] GB /T 121 - 1986 |
銷的技術條件 Specifications for pins |
| 36 | [國标] GB /T 959.1 - 1986 |
擋圈技術條件 - 彈性擋圈 |
|
| 37 | [國标] GB /T 959.3 - 1986 |
擋圈技術條件 切制擋圈 Spcifications for ring - Cutting rings |
|
| 38 | [國标] GB /T 3287 - 1982 |
可鍛鑄鐵管路連接件技術條件 Technical requirements of malleable cast iron pipe fittings |
|
| 39 | [國标] GB 38 - 1976 |
螺栓技術條件 |
|
| 40 | [德标] DIN 267-27 - 2024 |
緊固件 第27部分：帶預粘塗層的鋼制螺釘、螺栓和螺柱 技術規範 Fasteners - Part 27: Steel screws, bolts and studs made of steel with pre-adhesive coating - Technical specifications |
|
| 41 |
|
[德标] DIN 522 - 1990 |
墊圈. 交貨技術條件 metal washers; technical delivery conditions |
| 42 |
|
[德标] DIN 1543 - 1981 |
厚度 3 ~ 150mm 熱軋鋼闆的尺寸、重量及形狀允許偏差 Steel flat products; Hot rolled plate 3 to 150 mm thick; Permissible deviations of dimension, weight and form |
| 43 |
|
[德标] DIN 1544 - 1975 |
鋼制闆材、冷軋鋼闆 尺寸、允許的尺寸和形狀偏差 Flat products of steel; cold rolled steel strip; dimensions, tolerances on dimensions and form. |
| 44 | [國際] ISO 4107 - 2023 |
商用車輛 輪毂安裝尺寸 Commercial vehicles - Wheel-hub attachment dimensions |
|
| 45 | [國際] ISO 10069-2 - 2008 |
沖壓工具 彈性體壓縮彈簧 第2部分:附件規範 Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories |
|
| 46 | [國際] ISO 7789 - 2007 |
液壓傳動 二通、三通和四通螺紋式插裝閥 插裝孔 Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities |
|
| 47 | [機械行業] JB /T 4213 - 2014 |
緊固件冷镦模 技術條件 Cold heading dies for fasteners - Specifications |
|
| 48 |
|
[機械行業] JB /T 7653 - 2008 |
沖模零件技術條件 Specification of Stamping Die Components |
| 49 | [機械行業] JB /T 8044 - 1999 |
機床夾具零件及部件技術要求 Specifications for parts and units of jigs and fixtures |
|
| 50 | [機械行業] JB /T 9765.3 - 1999 |
内燃機 氣缸蓋螺母及飛輪螺母 技術條件 Internal combustion engines - Cylinder head and flywheel nuts - Specifications |
|
| 51 | [歐标] EN 14592 - 2022 |
木結構 銷釘型緊固件 要求 Timber structures - Dowel-type fasteners - Requirements |
|
| 52 | [歐标] EN 2583 - 2019 |
鎳基合金NI-PH2601(鉻鎳鐵合金718)耐熱MJ螺紋螺栓 等級-1275MPa(環境溫度)/650°C 技術規範 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C - Technical specification |
|
| 53 | [歐标] EN 14399-1 (requirements) - 2015 |
預加負荷用高強度結構螺栓組件 第1部分：一般要求 High-strength structural bolting assemblies for preloading - Part 1: General requirements |
|
| 54 | [歐标] EN 1515 (-3) - 2005 |
法蘭及其接頭 螺栓連接 第3部分：指定等級鋼法蘭螺栓材料的分類 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
|
| 55 | [歐标] EN 10204 - 2004 |
金屬制品檢驗文件的類型 Metallic products - Types of inspection documents |
|
| 56 | [歐标] EN 1515 (-2) - 2001 |
法蘭及其接頭 螺栓連接 第2部分：PN指定鋼法蘭螺栓材料分類 Flanges and their joints - bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
|
| 57 | [歐标] EN 1515 (-1) - 1999 |
法蘭及其接頭 螺栓連接 第1部分：螺栓連接的選擇 Flanges and their joints - bolting - Part 1: Selection of bolting |
|
| 58 | [歐标] EN 2943 - 1998 |
航空航天系列 自鎖螺旋線圈螺紋式插件技術規範 Aerospace series - Inserts, screw thread, helical coil, self locking - Technical specification |
|
| 59 | [歐标] EN 2945 - 1998 |
航空航天系列 螺旋形線圈自鎖螺紋插件組裝程序 Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure |
|
| 60 | [化工] HG /T 20614 - 2009 |
鋼制管法蘭、墊片、緊固件選配規定（PN系列） Specification for Selection of Steel Pipe Flanges , Gaskets and Bolting (PN designated) |
|
| 61 | [其它] API 20E - 2017 |
用于石油和天然氣工業的合金和碳鋼螺栓規範 Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries |
|
| 62 |
|
[美标] ASTM F 436 - 2011 |
淬硬鋼制平墊圈技術要求 |
| 63 | [美标] ASTM F 436M - 2011 |
米制系列淬硬鋼平墊圈技術要求 |
|
| 64 | [美标] ASTM A 394 - 2008 (R2015) |
有鍍層和無鍍層的鋼制輸電塔螺栓标準規範 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
|
| 65 | [建築] JG /T 576 - 2021 |
防水卷材屋面用機械固定件 Mechanical fixation component for waterproofing membrane roofing |
|
| 66 | [建築] JG /T 5057.40 - 1995 |
建築機械與設備高強度緊固件技術條件 Construction machinery and equipment Specification of high strength fasteners |
|
| 67 | [美标] SAE J 2295 - 1998 |
緊固件标準 帶帽螺釘、六角螺栓和六角螺母 Fastenersart - Standard - Cap Screws, Hex Bolts, and Hex Nuts |
|
| 68 | [美标] SAE J 78 - 1998 |
鑽尾自攻釘的技術要求 Steel Self-Drilling Tapping Screws |
|
| 69 | [汽标] QC /T 597.1 - 2017 |
螺紋緊固件預塗粘附層技術條件 第1部分：微膠囊鎖固層 Technical conditions for threaded fasteners with adhesive coating-Part 1: Microencapsulated locking coating |
|
| 70 | [汽标] QC /T 597.2 - 2017 |
螺紋緊固件預塗粘附層技術條件 第2部分：聚酰胺鎖緊層 Technical condions for threaded fasteners with adhesive coating-Part 2: Polyamlde locking coating |
|
| 71 | [印标] IS 1367 (-1) - 2002 |
螺紋鋼緊固件的技術供應條件：第1部分 - 螺栓、螺釘和雙頭螺栓的一般要求 Technical Supply Conditions For Threaded Steel Fasteners - Part 1 General Requirements For Bolts, Screws And Studs |
|
| 72 | [美标] ASME B 18.6.3 (DATA-G) - 2013 |
機械螺釘和自攻螺釘的通用要求 General data for machine screws and tapping screws |
|
| 73 | [航天] QJ 3146.1 - 2002 |
普通螺母和開槽螺母 第1部分：通用規範 Plain nuts and slotted nuts - Part 1: General specification |
|
| 74 | [航空] HB 5516 - 1996 |
普通型鋼絲螺套技術條件 |
|
| 75 | [煤炭行業标準] MT 187.1 - 1988 |
刮闆輸送機緊固件 螺栓技術條件 |
© 易緊通 服務熱線：4006-164580（免長途費）