木結構 銷釘型緊固件 要求 EN 14592 - 2022

　　This document specifies the characteristics of the following types of dowel-type fasteners: nails; staples; screws; dowels; bolts with nuts.

　　This document covers dowel-type fasteners for structural use in load bearing timber structures only. This document covers also the following additional intended uses of the screws:

　　— to fix roof or cladding elements to the timber structure, with or without insulation layers;

　　— as reinforcement inserted in timber or in a glue laminated timber element to improve its resistance to compression perpendicular to the grain.

　　This document covers types of dowel-type fasteners, which are manufactured of either carbon steel or stainless steel and which may be coated for the following purposes:

　　corrosion protection (as Type 1 coating); lubrication, to facilitate insertion (as Type 2 coating); withdrawal enhancement and/or collation for nails and staples (adhesive and/or resin coatings) (as Type 3 coating).

　　This document covers types of dowel-type fasteners, which are manufactured from materials and within the specifications for their geometry related properties, only as they are specified for: nails (see G.1); staples (see G.2); screws (see G.3); dowels (see G.4); bolts with nuts (see G.5).

　　This document specifies also the assessment and verification of constancy of performance (AVCP) procedures of these characteristics and includes provisions for marking of dowel-type fasteners.

　　This document does not cover dowel-type fasteners treated with fire retardants to improve their fire performance, nor does it cover glued-in rods.

　　2022年 EN 14592:2022 木材結構.銷型緊固件.要求

　　2012年 EN 14592:2008+A1:2012 木材結構.銷型緊固件.要求

　　2008年 EN 14592:2008 木材結構.銷型緊固件.要求