短周期弧焊焊接螺柱 Q 114
| 選擇規格尺寸 點擊↓ M3 M4 M5 M6 M8 M10 |
尺寸單位:
mm |
|
|
|||||||||||||||||||||||||||||||||||||||||
|
|
| ①,當焊接鋼闆厚度 ≥ 2mm時，焊接時間可以大于60ms，7°角度可以增至14°。 |
采用标準
技術條件和引用标準
|
|
||||||||||||||||||||||||||||||||||||||||
注：技術數據僅供參考，請以官方原件為準！
告訴我在“易緊通”看到，将給您優惠
21211537
登陸後可見類似标準及供貨信息
| 1 |
|
[國标] GB /T 902.2 (PD) - 2010 |
PD型電弧焊用焊接螺柱 Threaded studs for drawn arc stud welding with ceramic ferrule-PD style 供應商(2) |
| 2 |
|
[國标] GB /T 902.2 (RD) - 2010 |
RD型電弧焊用焊接螺柱 Threaded Studs For Drawn Arc Stud Welding With Ceramic Ferrule-RD Type 供應商(2) |
| 3 |
|
[國标] GB /T 902.1 - 2008 |
手工焊用焊接螺柱 Weld Studs For Manual Welding 供應商(6) |
| 4 |
|
[國标] GB /T 902.3 (PT) - 2008 |
PT型焊接螺柱 Weld Studs For Capacitor Discharge Welding - Type PT 供應商(4) |
| 5 |
|
[國标] GB /T 902.1 - 1989 |
手工焊用焊接螺柱 Weld studs for manual welding 供應商(6) |
| 6 |
|
[國标] GB /T 902.2 - 1989 |
機動弧用焊接螺柱 Weld studs for arc welding 供應商(2) |
| 7 |
|
[國标] GB /T 902.3 (PT) - 1989 |
儲能焊用焊接螺柱 Weld studs for capacitor discharge welding 供應商(4) |
| 8 |
|
[德标] DIN 525 - 2009 |
焊接螺柱 Weld studs |
| 9 |
|
[德标] DIN 34828 - 2005 |
單頭焊接螺柱 Welding Studs For Turnbuckles |
| 10 |
|
[德标] DIN 32500 (-5)1991 |
氣體保護焊焊接柱 快速螺柱焊接用帶凹槽螺柱 帶凸肩的螺柱(GK) Studs For Drawn Arc Stud Welding - Threaded Studs With Shoulder, Short Cycle Processes, GK |
| 11 |
|
[德标] DIN 525 - 1986 |
焊接螺柱 Weld studs |
| 12 |
|
[國際] ISO 13918 (MD) - 2017 |
電弧螺柱焊用螺柱 - MD型，近全螺紋螺柱（MPF） Stud for arc stud welding - Virtually Fully Threaded Stud (MPF) - Type MD 供應商(1) |
| 13 |
|
[國際] ISO 13918 (PD) - 2017 |
電弧螺柱焊用螺柱 - PD型，半牙螺柱 Stud for arc stud welding - Partially Threaded Stud - Type PD 供應商(1) |
| 14 |
|
[國際] ISO 13918 (RD) - 2017 |
電弧螺柱焊用螺柱 - RD型，帶縮杆的螺紋螺柱 Stud for arc stud welding - Threaded Stud with Reduced Shaft - Type RD 供應商(1) |
| 15 |
|
[國際] ISO 13918 (ID) - 2017 |
電弧螺柱焊用螺柱 - ID型，内螺紋螺柱 Stud for arc stud welding - Stud with Internal Thread - Type ID 供應商(1) |
| 16 |
|
[國際] ISO 13918 (PT) - 2017 |
儲能焊用焊接螺柱 - PT型，螺紋焊接螺柱 Stud welding with tip ignition - Threaded Stud - Type PT 供應商(3) |
| 17 |
|
[國際] ISO 13918 (IT) - 2017 |
儲能焊用焊接螺柱 - IT型，帶内螺紋螺柱 Stud welding with tip ignition - Stud with Internal Thread - Type IT 供應商(1) |
| 18 |
|
[國際] ISO 13918 (PD) - 2008 |
電弧螺柱焊用螺柱 - PD型，半牙螺柱 Stud for arc stud welding - Partially Threaded Stud - Type PD 供應商(1) |
| 19 |
|
[國際] ISO 13918 (RD) - 2008 |
RD型電弧焊用焊接螺柱 Threaded Studs For Drawn Arc Stud Welding With Ceramic Ferrule - RD Type 供應商(1) |
| 20 |
|
[國際] ISO 13918 (PD) - 1998 |
PD型，螺紋螺柱 Threaded studs(PD) 供應商(1) |
| 21 |
|
[國際] ISO 13918 (RD) - 1998 |
RD型，帶縮杆的螺紋螺柱 Threaded stud with reduced shaft(RD) 供應商(1) |
| 22 |
|
[國際] ISO 13918 (PT) - 1998 |
PT型，螺紋焊接螺柱 Threaded stud(PT) 供應商(3) |
| 23 |
|
[國際] ISO 13918 (IT) - 1998 |
IT型，内螺紋焊接螺柱 Stud with internal thread for arc stud welding(IT) 供應商(1) |
| 24 |
|
[國際] ISO 13918 (FD) - 2017 |
電弧螺柱焊用螺柱 - FD型，全螺紋螺柱 Stud for arc stud welding - Fully Threaded Stud - Type FD |
| 25 |
|
[國際] ISO 13918 (PS) - 2017 |
短周期電弧螺柱焊用焊接螺柱 - PS型，帶法蘭的螺紋螺柱 Short-cycle drawn arc stud welding - Threaded Stud with Flange - Type PS |
| 26 |
|
[國際] ISO 13918 (US) - 2017 |
短周期電弧螺柱焊用焊接螺柱 - US型，無螺紋螺柱（無頭焊釘） Short-cycle drawn arc stud welding - Unthreaded Stud - Type US |
| 27 |
|
[國際] ISO 13918 (IS) - 2017 |
短周期電弧螺柱焊用焊接螺柱 - IS型，内螺紋螺柱 Short-cycle drawn arc stud welding - Stud With Internal Thread - Type IS |
| 28 |
|
[國際] ISO 13918 (UD) - 1998 |
UD型，無螺紋螺柱 Unthreaded studs(UD) |
| 29 |
|
[國際] ISO 13918 (FD) - 1998 |
FD型，帶法蘭的螺紋螺柱 FD Weld screws |
| 30 |
|
[國際] ISO 13918 (UT) - 1998 |
UT型，無螺紋螺柱 Unthreaded stud for arc stud welding(UT) |
| 31 |
|
[汽标代号] Q 110 |
手工焊接用焊接螺柱 Weld Studs for Manual Welding |
| 32 |
|
[汽标代号] Q 118 |
塑料用焊接螺柱 Welding studs for plastic |
| 33 |
|
[企标] YJT 1004 |
米制種焊螺釘 Metric Spot welding stud |
| 34 |
|
[汽标] QC /T 869 - 2011 |
短周期弧焊焊接螺柱 Short-Cycle Drawn Arc Welding Studs 供應商(1) |
| 35 |
|
[汽标] QC /T 857 - 2011 |
焊接螺柱 Weld Studs |
| 36 |
|
[汽标] QC /T 881 - 2011 |
塑料用焊接螺柱 Welding Studs For Plastic |
© 易緊通 服務熱線：4006-164580（免長途費）