會員中心 | English | 簡體中文

開槽半沉頭螺釘 DIN 964 - 1990

選擇規格尺寸點擊↓

M1.2

M1.4

M1.6

M2.5

(M3.5)

M10

括号内尺寸為非優選

尺寸單位: mm

模型下載

模型下載替

掃一掃分享

單重計算公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積最小破壞扭矩牌号等級毛坯直徑

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

螺紋尺寸
d

M1.2

M1.4

M1.6

M2.5

(M3.5)

M10

P	螺距
a	最大值
d_k	最大值=公稱
d_k	最小值
f	≈
k	最大值
n	公稱
	最大值
	最小值
r	最大值
R	≈
t	最大值
t	最小值
x	最大值

0.25	0.25	0.3	0.35	0.4	0.45	0.5	0.6	0.7	0.8	1	1.25	1.5
0.5	0.5	0.6	0.7	0.8	0.9	1	1.2	1.4	1.6	2	2.5	3
1.9	2.3	2.6	3	3.8	4.7	5.6	6.5	7.5	9.2	11	14.5	18
1.76	2.06	2.46	2.86	3.5	4.4	5.3	6.14	7.14	8.84	10.57	14.07	17.5
0.25	0.3	0.35	0.4	0.5	0.6	0.75	0.9	1	1.25	1.5	2	2.5
0.6	0.72	0.84	0.96	1.2	1.5	1.65	1.93	2.2	2.5	3	4	5
0.25	0.3	0.3	0.4	0.5	0.6	0.8	0.8	1	1.2	1.6	2	2.5
0.45	0.5	0.5	0.6	0.7	0.8	1	1	1.2	1.51	1.91	2.31	2.81
0.31	0.36	0.36	0.46	0.56	0.66	0.86	0.86	1.06	1.26	1.66	2.06	2.56
0.1	0.12	0.14	0.16	0.2	0.25	0.3	0.35	0.4	0.5	0.6	0.8	1.0
2	2.5	3	3	4	5	6	7	8	10	12	16	20
0.5	0.6	0.65	0.8	1	1.2	1.45	1.7	1.9	2.3	2.8	3.7	4.6
0.4	0.5	0.52	0.65	0.8	1	1.2	1.4	1.6	2	2.4	3.2	4
-	-	-	0.9	1	1.1	1.25	1.5	1.75	2	2.5	3.2	3.8

千件鋼制重≈kg

螺紋長度b

最小值

①,材料：
a)鋼，強度等級(材料)：4.8,5.8,8.8. 标準DIN ISO 898-1
b)不鏽鋼，強度等級(材料)：A2-70，A4-70. 标準DIN 267-11
c)有色金屬，強度等級(材料)：CuZn=銅鋅合金，CU2或CU3由制造商選擇。标準DIN 267-18
d)其他強度等級或材料或某種材料，例如 CU3，按協議

替代列表

DIN 964 - 1990 DIN EN ISO 2010 - 1994

等效标準

國标 GB	國際 ISO	德标 DIN
GB /T 69	ISO 2010	DIN EN ISO 2010

以上有部分标準可能為近似等效，如有異議以标準原件為準

技術條件和引用标準

材料

鋼

不鏽鋼

有色金屬

通用要求
螺紋	公差
	标準
機械性能	等級
	标準
公差	產品等級
	标準
表面處理	-
	-
表面粗糙度
表面缺陷
驗收及包裝
備注

DIN 267 part 1
≤ M1.4：6h ＞M1.4：6g^①
DIN 13 part 13,15
4.8，5.8，8.8	A2-70，A4-70	CuZn = 銅鋅合金 CU2或CU3由制造商選擇
DIN ISO 898 part 1	DIN 267 part 11	DIN 267 part 18
A
DIN ISO 4759 part 1
不經處理 8.8：blackened （thermally or chemically）	blank	blank
電鍍 DIN 267 part 9
DIN 267 part 2
DIN 267 part 19
DIN 267 part 5
① Only for screws without surface protection. 6 g makes it possible for normal coating thicknesses to be applied in accordance with DIN 267 part 9, the reference line not being exceeded. Depending on the coating thickness required, a larger fundamental deviation shall be selected than that for the g position. This might, however, impair the resistance to stripping of the bolt / nut assembly.

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

告訴我在“易緊通”看到，将給您優惠

東台勃林邦五金科技有限公司

聯系人：徐明光

278446734@qg.com 移動電話： 13305198373（徐明光）；15358251989（柳崇興）電話：0515-85521989 Email:

登陸後可見

材質：304，316；規格範圍：M2-M8；支持非标定制

[詢價]

惠州市昇滬汽車緊固件科技有限公司

聯系人：黃俊輝

1540428407 移動電話： 13828802165 電話：0752-3951888, 3951820, 3951821, 3951825, 3951826 Email:

登陸後可見

材質：1008鋼、1018#碳鋼、Q235碳鋼、35#合金鋼、304HC不鏽鋼、316HC不鏽鋼，表面處理：環保彩鋅、環保藍白鋅、環保黑鋅、環保鎳、熱鍍鋅、達克羅、以及非環保電鍍，規格：齊全

[詢價]

類似标準及供貨信息

1	[國标] GB /T 69 - 2016	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
2	[國标] GB /T 69 - 2000	開槽半沉頭螺釘 Countersunk Slotted Raised Head Screws (Common Head Style) 供應商(1)
3	[國标] GB 69 - 1985	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
4	[國标] GB 949 - 1988	開槽半沉頭不脫出螺釘 Slotted Raised Countersunk Head Screws with Waisted Shank
5	[美标] IFI 513 - 1982	米制開槽半沉頭機械螺釘 Table 4 Metric Slotted Oval Countersunk Head Machine Screws
6	[德标] DIN 924 - 2012	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws With Dog Point
7	[德标] DIN 924 - 2006	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws With Dog Point
8	[國際] ISO 2010 - 2011	一字槽半沉頭螺釘(普通頭型).產品等級A Slotted Raised Countersunk Head Screws - Product Grade A 供應商(1)
9	[國際] ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) 產品等級A級 Countersunk slotted raised head screws (common head style); product grade A 供應商(1)
10	[日标] JIS B 1101 (T10) - 2017	開槽半沉頭螺釘表10 Slotted Raised Countersunk Head Screws - Table 10
11	[日标] JIS B 1101 (JA5) - 2017	開槽半沉頭螺釘附表JA.5 Slotted Raised Countersunk Head Screws - Table JA.5
12	[日标] JIS B 1116 - 2009	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws For Fine Mechanics
13	[日标] JIS B 1101 (AT4) - 1996	開槽半沉頭螺釘表4 [Attached Table 4] Slotted Raised Countersunk Head Screws [Attached Table 4]
14	[日标] JIS B 1101 (AAT3) - 1996	開槽半沉頭螺釘附表3 [Annex Attached Table 3] Slotted Raised Countersunk Head Screws [Annex Attached Table 3]
15	[日标] JIS B 1119 (1CFC) - 1986	眼鏡框架用 - 開槽倒角半沉頭螺釘 Spectacle Frames - Slotted Chamfered Flat Countersunk Machine Screws
16	[日标] JIS B 1119 (1RFC) - 1986	眼鏡框架用 - 開槽弧面半沉頭螺釘 Spectacle Frames - Slotted Round Flat Countersunk Machine Screws
17	[美标] ASME/ANSI B 18.6.3 - 2010	開槽半沉頭螺釘Table7 Slottted Oval Countersunk Head Machine Screws
18	[美标] ASME/ANSI B 18.6.3 (T11) - 2010	80°開槽半沉頭清根螺釘Table11 80° Slotted undercut oval countersunk head machine screws
19	[美标] ASME/ANSI B 18.6.7M - 1998	米制開槽半沉頭螺釘Table6 Metric slotted raised countersunk head screws
20	[法國] NF E 25-124 - 1994	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A
21	[法國] NF F 03-004 (FB) - 1983	鐵路車輛半沉頭側切口機械螺釘 Railway rolling stock Grade A raised countersunk notched head machine
22	[法國] NF F 03-006 (slot) - 1983	鐵路車輛 A級開槽半沉頭螺釘/螺母 Railway rolling stock Grade A Slotted raised countersunk head screws/nuts
23	[法國] NF F 03-006 (notch) - 1983	鐵路車輛 A級沉頭側切口螺釘/螺母 Railway rolling stock Grade A notched raised countersunk head screws/nuts
24	[英标] BS 1981 - 1991	開槽半沉頭螺釘(短的)Table10 Slottted Oval Countersunk Head Screws： Short Length
25	[英标] BS 1981 - 1991	開槽半沉頭螺釘Table8 Slotted Raised Countersunk Head Machine Screws
26	[英标] BS 4183 (T3) - 1967	開槽半沉頭機械螺釘 Slotted raised countersunk head machine screws. Metric series
27	[英标] BS 450 - 1958	英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3] Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
28	[澳标] AS /NZS 1427 - 1996	米制開槽半沉頭螺釘 [Table 2] ISO metric slotted raised countersunk head screws [Table 2]
29	[台灣] CNS 9679 - 1982	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws For Fine Mechanics
30	[台灣] CNS 4414 - 1981	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A
31	[俄标] GOST 17474 - 1980	開槽半沉頭螺釘 A級和B級 Raised countersunk head screws （Slotted）, product grades A and B
32	[韓标] KS B 1021 (T6) - 2012 (R2022)	開槽半沉頭螺釘【Table 6】 Slotted Raised Countersunk Head Screws【Table 6】
33	[德标] DIN EN ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) - 產品等級A級 Slotted Raised Countersunk Head Screws (Common Head Style) - Product Grade A 供應商(2)
34	[美标] ASME B 18.6.3 (H2A) - 2024	82° 開槽半沉頭機械螺釘(ASTM F837/F468) [TABLE 2.2.2-1] 82° Slotted Oval Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.2-1]
35	[美标] ASME B 18.6.3 (H3C) - 2024	82° 開槽半沉頭清根機械螺釘 (ASTM F837/F468) [TABLE 2.2.3-3] 82° Slotted Undercut Oval Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.3-3]
36	[美标] ASME B 18.6.3 (T7) - 2013	82° 開槽半沉頭機械螺釘 [Table 7] (ASTM F837 / F468) 82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)
37	[美标] ASME B 18.6.3 (T11) - 2013	82° 開槽半沉頭清根機械螺釘 [table 11] (ASTM F837 / F468) 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)
38	[航天] QJ 2388 - 1992	開槽半沉頭螺釘 Slotted countersunk raised head screws
39	[航空] HB 1- 209 - 1995	90°開槽半沉頭螺釘 90° Countersunk slotted raised head screws

開槽半沉頭螺釘 DIN 964 - 1990

相關材料标準或牌号

技術條件和引用标準

引用參考