會員中心 | English | 簡體中文

開槽半沉頭螺釘 A級和B級 GOST 17474 - 1980

選擇規格尺寸點擊↓

1.2

1.4

1.6

2.5

3.5

尺寸單位: mm

俄标GOST 17474 - 1980 GOST17474 17474GOST 開槽半沉頭螺釘 A級和B級

掃一掃分享

單重計算公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積最小破壞扭矩牌号等級毛坯直徑

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

螺紋尺寸
d

1.2

1.4

1.6

2.5

3.5

P	螺距	粗牙
		細牙
d_k
k	最大值
f	≈
R	≈
b	加長
	标準
n	公稱
	最小值
	最大值
t	最小值
	最大值

0.25	0.25	0.3	0.35	0.4	0.45	0.5	0.6	0.7
/	/	/	/	/	/	/	/	/
1.9	2.3	2.6	3	3.8	4.7	5.6	6.5	7.4
0.6	0.72	0.84	0.96	1.2	1.5	1.65	1.93	2.2
0.25	0.3	0.35	0.4	0.5	0.6	0.75	0.9	1
2.1	2.6	2.9	3.4	4.2	5.4	6	6.8	8
/	/	/	/	16	18	19	20	22
8	9	9	9	10	11	12	13	14
0.25	0.3	0.3	0.4	0.5	0.6	0.8	0.8	1
0.31	0.36	0.36	0.46	0.56	0.66	0.86	0.86	1.06
0.45	0.5	0.5	0.6	0.7	0.8	1	1	1.2
0.4	0.48	0.56	0.64	0.8	1	1.2	1.4	1.6
0.55	0.64	0.73	0.8	1	1.2	1.45	1.7	1.9

千件鋼制重≈kg

粗牙

螺紋尺寸
d

P	螺距	粗牙
		細牙
d_k
k	最大值
f	≈
R	≈
b	加長
	标準
n	公稱
	最小值
	最大值
t	最小值
	最大值

0.8	1	1.25	1.5	1.75	2	2	2.5	2.5
/	/	1	1.25	1.25	1.5	1.5	1.5	1.5
9.2	11	14.5	18	21.5	25	28.5	32.5	36
2.5	3	4	5	6	7	8	9	10
1.25	1.5	2	2.5	3	3.5	4	4.5	5
9.4	12	15	19	22.5	26	30	34	38
25	28	34	40	46	52	58	64	70
16	18	22	26	30	34	38	42	46
1.2	1.6	2	2.5	3	3	4	4	5
1.26	1.66	2.06	2.56	3.06	3.06	4.07	4.07	5.07
1.51	1.91	2.31	2.81	3.31	3.31	4.37	4.37	5.37
2	2.4	3.2	4	4.8	5.6	6.4	7.2	8
2.3	2.8	3.7	4.5	5.4	6.3	7.2	8.1	9

千件鋼制重≈kg

粗牙

①,r ≤ 0.1d。
②,ds≈螺紋中徑或螺紋大徑（GOST 19256-73）。

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[國标] GB /T 69 - 2016	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
2	[國标] GB /T 69 - 2000	開槽半沉頭螺釘 Countersunk Slotted Raised Head Screws (Common Head Style) 供應商(1)
3	[國标] GB 69 - 1985	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
4	[國标] GB 949 - 1988	開槽半沉頭不脫出螺釘 Slotted Raised Countersunk Head Screws with Waisted Shank
5	[美标] IFI 513 - 1982	米制開槽半沉頭機械螺釘 Table 4 Metric Slotted Oval Countersunk Head Machine Screws
6	[德标] DIN 964 - 1990	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(2)
7	[德标] DIN 924 - 2012	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws With Dog Point
8	[德标] DIN 924 - 2006	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws With Dog Point
9	[國際] ISO 2010 - 2011	一字槽半沉頭螺釘(普通頭型).產品等級A Slotted Raised Countersunk Head Screws - Product Grade A 供應商(1)
10	[國際] ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) 產品等級A級 Countersunk slotted raised head screws (common head style); product grade A 供應商(1)
11	[日标] JIS B 1101 (T10) - 2017	開槽半沉頭螺釘表10 Slotted Raised Countersunk Head Screws - Table 10
12	[日标] JIS B 1101 (JA5) - 2017	開槽半沉頭螺釘附表JA.5 Slotted Raised Countersunk Head Screws - Table JA.5
13	[日标] JIS B 1116 - 2009	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws For Fine Mechanics
14	[日标] JIS B 1101 (AT4) - 1996	開槽半沉頭螺釘表4 [Attached Table 4] Slotted Raised Countersunk Head Screws [Attached Table 4]
15	[日标] JIS B 1101 (AAT3) - 1996	開槽半沉頭螺釘附表3 [Annex Attached Table 3] Slotted Raised Countersunk Head Screws [Annex Attached Table 3]
16	[日标] JIS B 1119 (1CFC) - 1986	眼鏡框架用 - 開槽倒角半沉頭螺釘 Spectacle Frames - Slotted Chamfered Flat Countersunk Machine Screws
17	[日标] JIS B 1119 (1RFC) - 1986	眼鏡框架用 - 開槽弧面半沉頭螺釘 Spectacle Frames - Slotted Round Flat Countersunk Machine Screws
18	[美标] ASME/ANSI B 18.6.3 - 2010	開槽半沉頭螺釘Table7 Slottted Oval Countersunk Head Machine Screws
19	[美标] ASME/ANSI B 18.6.3 (T11) - 2010	80°開槽半沉頭清根螺釘Table11 80° Slotted undercut oval countersunk head machine screws
20	[美标] ASME/ANSI B 18.6.7M - 1998	米制開槽半沉頭螺釘Table6 Metric slotted raised countersunk head screws
21	[法國] NF E 25-124 - 1994	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A
22	[法國] NF F 03-004 (FB) - 1983	鐵路車輛半沉頭側切口機械螺釘 Railway rolling stock Grade A raised countersunk notched head machine
23	[法國] NF F 03-006 (slot) - 1983	鐵路車輛 A級開槽半沉頭螺釘/螺母 Railway rolling stock Grade A Slotted raised countersunk head screws/nuts
24	[法國] NF F 03-006 (notch) - 1983	鐵路車輛 A級沉頭側切口螺釘/螺母 Railway rolling stock Grade A notched raised countersunk head screws/nuts
25	[英标] BS 1981 - 1991	開槽半沉頭螺釘(短的)Table10 Slottted Oval Countersunk Head Screws： Short Length
26	[英标] BS 1981 - 1991	開槽半沉頭螺釘Table8 Slotted Raised Countersunk Head Machine Screws
27	[英标] BS 4183 (T3) - 1967	開槽半沉頭機械螺釘 Slotted raised countersunk head machine screws. Metric series
28	[英标] BS 450 - 1958	英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3] Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
29	[澳标] AS /NZS 1427 - 1996	米制開槽半沉頭螺釘 [Table 2] ISO metric slotted raised countersunk head screws [Table 2]
30	[台灣] CNS 9679 - 1982	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws For Fine Mechanics
31	[台灣] CNS 4414 - 1981	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A
32	[韓标] KS B 1021 (T6) - 2012 (R2022)	開槽半沉頭螺釘【Table 6】 Slotted Raised Countersunk Head Screws【Table 6】
33	[德标] DIN EN ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) - 產品等級A級 Slotted Raised Countersunk Head Screws (Common Head Style) - Product Grade A 供應商(2)
34	[美标] ASME B 18.6.3 (H2A) - 2024	82° 開槽半沉頭機械螺釘(ASTM F837/F468) [TABLE 2.2.2-1] 82° Slotted Oval Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.2-1]
35	[美标] ASME B 18.6.3 (H3C) - 2024	82° 開槽半沉頭清根機械螺釘 (ASTM F837/F468) [TABLE 2.2.3-3] 82° Slotted Undercut Oval Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.3-3]
36	[美标] ASME B 18.6.3 (T7) - 2013	82° 開槽半沉頭機械螺釘 [Table 7] (ASTM F837 / F468) 82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)
37	[美标] ASME B 18.6.3 (T11) - 2013	82° 開槽半沉頭清根機械螺釘 [table 11] (ASTM F837 / F468) 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)
38	[航天] QJ 2388 - 1992	開槽半沉頭螺釘 Slotted countersunk raised head screws
39	[航空] HB 1- 209 - 1995	90°開槽半沉頭螺釘 90° Countersunk slotted raised head screws