會員中心 | English | 簡體中文

鐵路車輛 A級開槽半沉頭螺釘/螺母 NF F 03-006 (slot) - 1983

選擇規格尺寸點擊↓

NF F 03-006 (slot) - 1983 鐵路車輛 A級開槽半沉頭螺釘/螺母

尺寸單位: mm

法國NF F03-006 (slot) - 1983 NF03-006 03-0 鐵路車輛 A級開槽半沉頭螺釘/螺母

掃一掃分享

公差公制螺紋極限尺寸米/英制螺紋對照

螺紋尺寸
d

P	螺距
d₁	最大值
d₁	最小值
d_k	最大值
d_k	最小值
k	最大值
k	最小值
f	≈
d_s	最大值
d_s	最小值
b	最大值
b	最小值
b₁	最大值
b₁	最小值
d_p	最大值
d_p	最小值
n	最大值
n	最小值
t	最大值
t	最小值
R	≈
r	最大值
L₁	最大值
L₁	最小值

0.5	0.7	0.8	1	1.25
5	6	7	8	10
4.88	5.88	6.5	7.5	9.5
7.3	9.3	11.3	13.3	17
6.9	8.9	10.9	12.9	16.5
1.6	2.2	2.8	3.2	4.2
/	/	/	2.8	3.8
0.8	1.2	1.4	1.7	2
3	4	5	6	8
2.5	3.3	4.2	5.4	6.8
5.3	7.36	8.36	9.36	11.43
5	7	8	9	11
6	8.5	10	11.5	14
5.7	8.14	9.64	11.07	13.57
2	2.5	3.5	4	5.5
1.75	2.25	3.2	3.7	5.2
1.2	1.51	1.91	1.91	2.31
1.06	1.26	1.66	1.66	2.06
1.45	1.9	2.4	2.8	3.7
1.2	1.6	2	2.4	3.2
8.5	9.5	12	13.5	19
0.8	1	1.3	1.5	2
9.22	11.27	13.27	15.27	19.33
9	11	13	15	19

Clamping

技術條件和引用标準

材料

鋼

不鏽鋼

有色金屬

螺紋	公差
	标準
機械性能	等級
	标準
公差	產品等級
	标準
表面處理

6H/6g
NF E 03-001，NF E 03-014
螺釘：6.8 螺母：6	A2-70	協議
螺釘：NF E 25-100 螺母：NF E 25-400
A
NF E 27-021
無塗層電鍍：NF E 27-016 其他塗層：E 27-018	不經處理 Clean and bright	協議

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[國标] GB /T 69 - 2016	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
2	[國标] GB /T 69 - 2000	開槽半沉頭螺釘 Countersunk Slotted Raised Head Screws (Common Head Style) 供應商(1)
3	[國标] GB 69 - 1985	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1)
4	[國标] GB 949 - 1988	開槽半沉頭不脫出螺釘 Slotted Raised Countersunk Head Screws with Waisted Shank
5	[美标] IFI 513 - 1982	米制開槽半沉頭機械螺釘 Table 4 Metric Slotted Oval Countersunk Head Machine Screws
6	[德标] DIN 964 - 1990	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(2)
7	[德标] DIN 924 - 2012	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws With Dog Point
8	[德标] DIN 924 - 2006	開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws With Dog Point
9	[國際] ISO 2010 - 2011	一字槽半沉頭螺釘(普通頭型).產品等級A Slotted Raised Countersunk Head Screws - Product Grade A 供應商(1)
10	[國際] ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) 產品等級A級 Countersunk slotted raised head screws (common head style); product grade A 供應商(1)
11	[日标] JIS B 1101 (T10) - 2017	開槽半沉頭螺釘表10 Slotted Raised Countersunk Head Screws - Table 10
12	[日标] JIS B 1101 (JA5) - 2017	開槽半沉頭螺釘附表JA.5 Slotted Raised Countersunk Head Screws - Table JA.5
13	[日标] JIS B 1116 - 2009	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws For Fine Mechanics
14	[日标] JIS B 1101 (AT4) - 1996	開槽半沉頭螺釘表4 [Attached Table 4] Slotted Raised Countersunk Head Screws [Attached Table 4]
15	[日标] JIS B 1101 (AAT3) - 1996	開槽半沉頭螺釘附表3 [Annex Attached Table 3] Slotted Raised Countersunk Head Screws [Annex Attached Table 3]
16	[日标] JIS B 1119 (1CFC) - 1986	眼鏡框架用 - 開槽倒角半沉頭螺釘 Spectacle Frames - Slotted Chamfered Flat Countersunk Machine Screws
17	[日标] JIS B 1119 (1RFC) - 1986	眼鏡框架用 - 開槽弧面半沉頭螺釘 Spectacle Frames - Slotted Round Flat Countersunk Machine Screws
18	[美标] ASME/ANSI B 18.6.3 - 2010	開槽半沉頭螺釘Table7 Slottted Oval Countersunk Head Machine Screws
19	[美标] ASME/ANSI B 18.6.3 (T11) - 2010	80°開槽半沉頭清根螺釘Table11 80° Slotted undercut oval countersunk head machine screws
20	[美标] ASME/ANSI B 18.6.7M - 1998	米制開槽半沉頭螺釘Table6 Metric slotted raised countersunk head screws
21	[法國] NF E 25-124 - 1994	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A
22	[法國] NF F 03-004 (FB) - 1983	鐵路車輛半沉頭側切口機械螺釘 Railway rolling stock Grade A raised countersunk notched head machine
23	[法國] NF F 03-006 (notch) - 1983	鐵路車輛 A級沉頭側切口螺釘/螺母 Railway rolling stock Grade A notched raised countersunk head screws/nuts
24	[英标] BS 1981 - 1991	開槽半沉頭螺釘(短的)Table10 Slottted Oval Countersunk Head Screws： Short Length
25	[英标] BS 1981 - 1991	開槽半沉頭螺釘Table8 Slotted Raised Countersunk Head Machine Screws
26	[英标] BS 4183 (T3) - 1967	開槽半沉頭機械螺釘 Slotted raised countersunk head machine screws. Metric series
27	[英标] BS 450 - 1958	英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3] Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
28	[澳标] AS /NZS 1427 - 1996	米制開槽半沉頭螺釘 [Table 2] ISO metric slotted raised countersunk head screws [Table 2]
29	[台灣] CNS 9679 - 1982	精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws For Fine Mechanics
30	[台灣] CNS 4414 - 1981	開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A
31	[俄标] GOST 17474 - 1980	開槽半沉頭螺釘 A級和B級 Raised countersunk head screws （Slotted）, product grades A and B
32	[韓标] KS B 1021 (T6) - 2012 (R2022)	開槽半沉頭螺釘【Table 6】 Slotted Raised Countersunk Head Screws【Table 6】
33	[德标] DIN EN ISO 2010 - 1994	開槽半沉頭螺釘(通用頭型) - 產品等級A級 Slotted Raised Countersunk Head Screws (Common Head Style) - Product Grade A 供應商(2)
34	[美标] ASME B 18.6.3 (H2A) - 2024	82° 開槽半沉頭機械螺釘(ASTM F837 / F468) 82° Slotted Oval Countersunk Head Machine Screws (ASTM F837 / F468)
35	[美标] ASME B 18.6.3 (H3C) - 2024	82° 開槽半沉頭清根機械螺釘 (ASTM F837 / F468) 82° Slotted Undercut Oval Countersunk Head Machine Screws (ASTM F837 / F468)
36	[美标] ASME B 18.6.3 (T7) - 2013	82° 開槽半沉頭機械螺釘 [Table 7] (ASTM F837 / F468) 82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)
37	[美标] ASME B 18.6.3 (T11) - 2013	82° 開槽半沉頭清根機械螺釘 [table 11] (ASTM F837 / F468) 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)
38	[航天] QJ 2388 - 1992	開槽半沉頭螺釘 Slotted countersunk raised head screws
39	[航空] HB 1- 209 - 1995	90°開槽半沉頭螺釘 90° Countersunk slotted raised head screws