會員中心 | English | 簡體中文

開槽盤頭螺釘和彈墊組合SEMS [Table 2] ASME B 18.13 - 2018 (ERTA)

選擇規格尺寸點擊↓

10#

12#

1/4

5/16

3/8

ASME B 18.13 - 2018 (ERTA) 開槽盤頭螺釘和彈墊組合SEMS [Table 2]

尺寸單位: inch

美标ASME B18.13 - 2018 (ERTA) ASME18.13 18 開槽盤頭螺釘和彈墊組合SEMS [Table 2]

掃一掃分享

公差美制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積

螺紋尺寸
d

10#

12#

1/4

5/16

3/8

d
PP	UNC
d₁	最大值
d₁	最小值
h	最小值
d_c	最大值
d_c	最小值
d_k	最大值
d_k	最小值
k	最大值
k	最小值
n	最大值
n	最小值
t	最小值

0.0860	0.0990	0.1120	0.1250	0.1380	0.1640	0.1900	0.2160	0.2500	0.3125	0.3750
56	48	40	40	32	32	24	24	20	18	16
0.080	0.091	0.105	0.118	0.129	0.155	0.179	0.203	0.238	0.298	0.361
0.075	0.086	0.101	0.113	0.124	0.149	0.173	0.196	0.230	0.290	0.353
0.020	0.025	0.031	0.031	0.034	0.031	0.047	0.062	0.062	0.078	0.093
0.156	0.178	0.208	0.220	0.261	0.319	0.373	0.429	0.495	0.618	0.711
0.145	0.166	0.195	0.207	0.248	0.305	0.359	0.414	0.480	0.602	0.695
0.167	0.193	0.219	0.245	0.270	0.322	0.373	0.425	0.492	0.615	0.740
0.155	0.180	0.205	0.231	0.256	0.306	0.357	0.407	0.473	0.594	0.716
0.053	0.060	0.068	0.075	0.082	0.096	0.110	0.125	0.144	0.178	0.212
0.045	0.051	0.058	0.065	0.072	0.085	0.099	0.112	0.130	0.162	0.195
0.031	0.035	0.039	0.043	0.048	0.054	0.060	0.067	0.075	0.084	0.094
0.023	0.027	0.031	0.035	0.039	0.045	0.050	0.056	0.064	0.072	0.081
0.022	0.026	0.030	0.034	0.037	0.045	0.053	0.061	0.070	0.085	0.100

替代列表

ANSI/ASME B 18.13 - 1996 ANSI/ASME B 18.13 - 2017

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[國标] GB /T 9074.1 - 2018	螺栓或螺釘和平墊圈組合件 Bolt Or Screw And Washer Assemblies With Plain Washers 供應商(5)
2	[國标] GB /T 9074.5 - 2004	十字槽小盤頭螺釘和平墊圈組合件 Cross Recessed Small Pan Head Screw And Washer Assemblies With Plain Washers 供應商(2)
3	[國标] GB /T 9074.1 - 2002	螺栓或螺釘和平墊圈組合件 Bolt Or Screw And Washer Assemblies With Plain Washers 供應商(5)
4	[國标] GB /T 9074.1 - 1988	十字槽盤頭螺釘和平墊圈組合 Cross recessed pan head screws and plain washers assemblies 供應商(5)
5	[國标] GB 9074.2 - 1988	十字槽盤頭螺釘和外鋸齒鎖緊墊圈組合件 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies 供應商(3)
6	[國标] GB 9074.3 - 1988	十字槽盤頭螺釘和彈簧墊圈組合件 Cross Recessed Pan Head Screws And Single coil Spring Lock Washers Assemblies 供應商(3)
7	[國标] GB 9074.4 - 1988	十字槽盤頭螺釘、彈簧墊圈和平墊圈組合件 Cross Recessed Pan Head Screws,Single Coil Spring Lock Washer And Plain Washers Assemblies 供應商(13)
8	[國标] GB /T 9074.5 - 1988	十字槽小盤頭螺釘和平墊組合 Cross recessed small pan head screw and plain washer assemblies 供應商(2)
9	[國标] GB /T 9074.6 - 1988	十字槽小盤頭螺釘和大平墊組合 Cross recessed small pan head screw and large plain washer assemblies 供應商(2)
10	[國标] GB 9074.7 - 1988	十字槽小盤頭螺釘和彈簧墊圈組合件 Cross Recessed Small Pan Head Screw And Single Coil Spring Lock Washer Assemblies 供應商(2)
11	[國标] GB 9074.8 - 1988	十字槽小盤頭螺釘、彈簧墊圈及平墊圈組合件 Cross Recessed Small Pan Head Screw,Single Coil Spring Lock Washer And Plain Washer Assemblies 供應商(10)
12	[國标] GB 9074.9 - 1988	十字槽沉頭螺釘和錐形鎖緊墊圈組合件 Cross Recessed Countersunk Head Screw And Countersunk Serrated External Toothed Lock Washer Assemblies 供應商(1)
13	[國标] GB /T 9074.1 (S11)	内六角花形（梅花槽）盤頭螺釘和平墊圈組合件 Hexagon Lobular Socket Pan Head Screws And Washer Assemblies With Plain Washers 供應商(1)
14	[國标] GB /T 9074.32 - 2017	螺栓或螺釘和錐形彈性墊圈組合件 Bolt or Screw and Washer Assemblies with Conical Spring Washers
15	[國标] GB 9074.10 - 1988	十字槽半沉頭螺釘和錐形鎖緊墊圈組合 Cross Recessed Raised Countersunk Head Screw And Countersunk External Toothed Lock Washer Assemblies
16	[國标] GB /T 9074.1 (S3)	十字槽盤頭螺釘和平墊圈組合件 Cross Recessed Pan Head Screws And Washer Assemblies With Plain Washers
17	[國标] GB /T 9074.1 (S4)	内六角圓柱頭螺釘和平墊圈組合件 Hexagon Socket Head Cap Screws And Washer Assemblies With Plain Washers
18	[國标] GB /T 9074.1 (S5)	開槽盤頭螺釘和平墊圈組合件 Slotted Pan Head Screws And Washer Assemblies With Plain Washers
19	[國标] GB /T 9074.1 (S6)	開槽圓柱頭螺釘和平墊圈組合件 Slotted Cheese Head Screws And Washer Assemblies With Plain Washers
20	[國标] GB /T 9074.1 (S10)	内六角花形（梅花槽）圓柱頭螺釘和平墊圈組合件 Hexalobular Socket Head Cap Screws And Washer Assemblies With Plain Washers
21	[國标] GB /T 9074.1 (S12)	六角法蘭面螺栓和平墊圈組合件 Hexagon Flange Bolts And Washer Assemblies With Plain Washers
22	[國标] GB /T 9074.1 (S13)	六角法蘭面螺栓（細牙）和平墊圈組合件 Hexagon Flange Bolts (Fine Pitch Thread ) And Washer Assemblies With Plain Washers
23	[德标] DIN 6900-1 - 1990	十字盤頭螺釘和平墊圈的組合螺釘 Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer 供應商(1)
24	[德标] DIN 6900-5 - 2004	錐形彈性墊圈與螺釘組合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer
25	[德标] DIN 6304 (E) - 2002	帶固定旋杆的卡式螺栓 E型 Tommy screws with fixed clamping bolt - Form E
26	[德标] DIN 6304 (F) - 2002	帶固定旋杆的卡式螺栓 F型 Tommy screws with fixed clamping bolt - Form F
27	[德标] DIN 6306 (D) - 2002	帶移動卡式螺栓的定位銷釘 D型 Tommy screws with moveable clamping bolt - Type D
28	[德标] DIN 6306 (E) - 2002	帶移動卡式螺栓的定位銷釘 E型 Tommy screws with moveable clamping bolt - Type E
29	[德标] DIN 6900-2 - 1990	開槽螺釘和波形墊圈組合 Slotted screws and wave washers assemblies
30	[德标] DIN 6900-3 - 1990	鞍形彈簧墊圈與螺釘組合件 Screw And Washer Assemblies With Coarse Thread With Curved Spring Lock Washer
31	[德标] DIN 6900-4 - 1990	齒形彈簧墊圈與螺釘組合件 Screw And Washer Assemblies With Coarse Threaded Screws With Captive Serrated Lock Washer
32	[德标] DIN 6900-5 - 1990	錐形彈性墊圈與螺釘組合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer
33	[國際] ISO 2982-2 (Clip) - 2013	滾動軸承附件 - 鎖緊卡組件 Rolling bearings - Accessories - Locking Clip Assemblies
34	[國際] ISO 10644 - 2009	螺絲和鋼制平墊圈組合件墊圈硬度200HV和300HV Screw And Washer Sssemblies Made Of Steel With Plain Washers - Washer Hardness Classes 200 HV And 300 HV
35	[國際] ISO 10644 - 1998	螺絲和鋼制平墊圈組合件墊圈硬度200HV和300HV Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200
36	[日标] JIS B 1188 (T1A) - 1995	十字槽盤頭螺釘、平墊和彈墊組合件 Cross Recessed Pan Head Screws, Spring Lock Washer and Plain Washer Assemblles 供應商(2)
37	[日标] JIS B 1554 (AL/ALL) - 2016	鎖緊卡組件 Locking clip and applicable bolt
38	[日标] JIS B 1130 - 2012	十字盤頭螺釘和平墊圈的組合 Cross Recessed Pan Screw Assemblies With Washers
39	[日标] JIS B 1130 - 2006	十字盤頭螺釘和平墊圈的組合 Cross recessed pan screws and plain washers assemblies
40	[日标] JIS B 1188 (T1B) - 1995	十字槽盤頭螺釘和彈墊組合 Cross Recessed Pan Head Screws And Spring Lock Washer Assembiles
41	[日标] JIS B 1188 (T1C) - 1995	十字盤頭螺釘和平墊圈組合 Cross Recessed Pan Head Screws And Plain Washer Assemblies
42	[日标] JIS B 1188 (T1D) - 1995	十字盤頭螺釘和外齒鎖緊墊圈組合 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies
43	[汽标代号] Q 230B	十字槽盤頭螺釘與平墊組合 Cross recessed pan head tapping screws and plain washers assemblies 供應商(1)
44	[汽标代号] Q 232	十字槽盤頭螺釘與彈墊組合 Cross recessed pan head screws and spring washer assemblies 供應商(1)
45	[汽标代号] Q 234	十字槽盤頭螺釘與外鋸齒鎖緊墊圈組合 Cross recessed pan head screws and serrated lock washers external teeth assemblies 供應商(1)
46	[汽标代号] Q 236B	十字槽盤頭螺釘與彈墊平墊組合 Cross recessed pan head screws combine with spring washer and plain washers 供應商(2)
47	[汽标代号] Q 140B	六角頭螺栓與平墊圈組合件 Hex head and plain washer combination bolt
48	[汽标代号] Q 240	十字槽沉頭螺釘與錐形外鋸齒鎖緊墊圈組合 Cross recessed countersunk head screws and serrated lock washers external teeth assemblies
49	[汽标代号] Q 242	十字槽半沉頭螺釘與錐形外鋸齒鎖緊墊圈組合 Cross recessed countersunk raised head screws and serrated lock washers external teeth assemblies
50	[機械行業] JB /T 7919.3 - 1999	鎖緊卡組件 Locking Clip Assemblies
51	[美标] ASME/ANSI B 18.13.1M - 2011	米制内六角圓柱頭螺釘和彈墊組合 SEMS [Table 1] Metric Socket Head Cap Screw and Spring Washer Assemblies-SEMS(Machine Screw Thread Diameter) 供應商(1)
52	[美标] ASME/ANSI B 18.13.1M - 2011	米制開槽盤頭螺釘和彈墊組合 SEMS[Table 1] Metric Slotted Pan Head Screw and Spring Washer Assemblies-SEMS (Machine Screw Thread Diameter)
53	[美标] ASME/ANSI B 18.13 - 1996	内六角圓柱頭螺釘和彈墊組合SEMS [Table 1] Socket head cap screw and spring washer assemblies-SEMS
54	[美标] ASME/ANSI B 18.13 - 1996	開槽盤頭螺釘和彈墊組合 SEMS[Table 2] Slotted pan head screw and spring washer assemblies-SEMS
55	[原電子工業部] SJ 2834 - 1987	十字盤頭螺釘和平墊圈的組合
56	[原電子工業部] SJ 2835 - 1987	十字槽盤頭螺釘和彈墊組合
57	[原電子工業部] SJ 2836 - 1987	十字盤頭螺釘和平、彈墊組合
58	[企标] YJT 4031	皇冠螺釘供應商(1)
59	[企标] YJT 4068 (GB9074.4T)	内六角花形槽盤頭平彈墊組合件 Hexalobular Socket Pan Head Screws, Single coil spring lock washer and Plain washer Assembles 供應商(1)
60	[企标] YJT 4079 (GB 70.1 + GB 9074.13)	内六角圓柱頭螺釘和平墊、彈墊組合件 Hexagon socket head cap screws with single coil lock washer and plain washer assemblies 供應商(5)
61	[企标] YJT 8021	十一槽子母鉚釘供應商(1)
62	[西門子] SN 60736	内六角花形盤頭螺釘組合件供應商(1)
63	[德标] DIN EN ISO 10644 - 2009	螺絲和鋼制平墊圈組合件墊圈硬度200HV和300HV Screw and Washer Assemblies made of Steel with Plain Washers – Washer hardness classes 200 HV and 300 HV 供應商(1)
64	[德标] DIN EN ISO 10644 (S11)	内六角花形（梅花槽）盤頭螺釘和平墊圈組合件 Hexagon Lobular Socket Pan Head Screws And Washer Assemblies With Plain Washers 供應商(1)
65	[德标] DIN EN ISO 10644 (S3)	十字槽盤頭螺釘和平墊圈組合件 Cross Recessed Pan Head Screws And Washer Assemblies With Plain Washers
66	[德标] DIN EN ISO 10644 (S4)	内六角圓柱頭螺釘和平墊圈組合件 Hexagon Socket Head Cap Screws And Washer Assemblies With Plain Washers
67	[德标] DIN EN ISO 10644 (S5)	開槽盤頭螺釘和平墊圈組合件 Slotted Pan Head Screws And Washer Assemblies With Plain Washers
68	[德标] DIN EN ISO 10644 (S6)	開槽圓柱頭螺釘和平墊圈組合件 Slotted Cheese Head Screws And Washer Assemblies With Plain Washers
69	[德标] DIN EN ISO 10644 (S10)	内六角花形（梅花槽）圓柱頭螺釘和平墊圈組合件 Hexalobular Socket Head Cap Screws And Washer Assemblies With Plain Washers
70	[德标] DIN EN ISO 10644 (S12)	六角法蘭面螺栓和平墊圈組合件 Hexagon Flange Bolts And Washer Assemblies With Plain Washers
71	[德标] DIN EN ISO 10644 (S13)	六角法蘭面螺栓（細牙）和平墊圈組合件 Hexagon Flange Bolts (Fine Pitch Thread ) And Washer Assemblies With Plain Washers
72	[美标] ASME B 18.13 - 2017	内六角圓柱頭螺釘和彈墊組合 SEMS[Table 1] Helical Spring Lock Washers for Socket Head Cap Screw SEMS