會員中心 | English | 簡體中文

開槽半沉頭自攻螺釘 NF E 25-661 - 1994

選擇規格尺寸點擊↓

ST2.2

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

尺寸單位: mm

法國NF E25-661 - 1994 NF25-661 25-661NF 開槽半沉頭自攻螺釘

掃一掃分享

單重計算公差

螺紋規格
d

ST2.2

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

P	螺距
d_k	最大值
d_k	最小值
k	最大值
n	最小值
n	最大值
t	最小值
t	最大值

0.8	1.1	1.3	1.4	1.6	1.8	1.8	2.1	2.1
3.8	5.5	7.3	8.4	9.3	10.3	11.3	15.8	18.3
3.5	5.2	6.9	8	8.9	9.9	10.9	15.4	17.8
1.1	1.7	2.35	2.6	2.8	3	3.15	4.65	5.25
0.56	0.86	1.06	1.26	1.26	1.66	1.66	2.06	2.56
0.7	1	1.2	1.51	1.51	1.91	1.91	2.31	2.81
0.8	1.2	1.4	1.6	2	2.2	2.4	3.2	3.8
1	1.45	1.7	1.9	2.4	2.6	2.8	3.7	4.4

引用參考

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 5280 - 2002

自攻螺釘用螺紋

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[國标] GB /T 5284 - 2017	開槽半沉頭自攻螺釘 Slotted Raised Countersunk(Oval) Head Tapping Screws
2	[國标] GB /T 5284 - 1985	開槽半沉頭自攻螺釘 Slotted Raised Countersunk Head Tapping Screws
3	[美标] IFI 502 - 1982	米制開槽半沉頭自攻釘 Metric Slotted Oval Countersunk Head Tapping Screws
4	[德标] DIN 7973 - 1990	開槽半沉頭自攻螺釘 Slotted Raised Countersunk Head Tapping Screws 供應商(3)
5	[國際] ISO 1483 - 2011	開槽半沉頭自攻螺釘 Slotted Raised Countersunk (Oval) Head Tapping Screws
6	[國際] ISO 9268 (F1) - 1988	開槽接骨螺釘 HC螺紋 [Figure 1] Metal bone Screw with Single-slot Recess, with Symmetrical Thread Form HC [Figure 1]
7	[國際] ISO 1483 - 1983	開槽半沉頭自攻螺釘 Slotted raised countersunk head tapping screws
8	[日标] JIS B 1115 (T9) - 2015	開槽半沉頭自攻螺釘 [Table 9] Slotted Raised Countersunk Head Tapping Screws [Table 9]
9	[日标] JIS B 1115 (JA5) - 2015	開槽半沉頭自攻釘 [表JA5] Slotted Raised countersunk head tapping screws [Table JA5]
10	[日标] JIS B 1115 (T3) - 1996	開槽半沉頭自攻釘 [表3] Slotted raised countersunk head tapping screws [Table 3]
11	[日标] JIS B 1115 (AT3) - 1996	開槽半沉頭自攻釘 [附表3] Slotted Raised countersunk head tapping screws [Annex Table 3]
12	[美标] ASME/ANSI B 18.6.3 - 2010	80°開槽半沉頭自攻釘 80° Machine Screw and Tapping Screw Nuts (Inch Seires)
13	[英标] BS 4174 - 1972	開槽80°半沉頭自攻釘 [Table 12] 80°Slotted Raised Countersunk Head Tapping Screws [Table 12]
14	[英标] BS 4174 - 1972	米字槽80°半沉頭自攻釘 [Table 13] Cross Recess 80° Raised Countersunk Head Tapping Screws [Table 13]
15	[英标] BS 4174 - 1972	開槽80°半沉頭清根自攻釘 [Table 14] Slotted 80° truncated Raised Countersunk Head Screws [Table 14]
16	[澳标] AS /NZS 4405 - 1996	米制開槽半沉頭自攻螺釘 ISO metric slotted raised countersunk head tapping screws
17	[德标] DIN EN ISO 1483 - 2011	開槽半沉頭自攻螺釘 Slotted Raised Countersunk (Oval) Head Tapping Screws 供應商(3)
18	[美标] ASME B 18.6.3 (H2A+T1A) - 2024	82°開槽半沉頭 AB ABR 自攻螺釘 82° Dimensions of Slotted Oval Countersunk Head Tapping Screws
19	[美标] ASME B 18.6.3 (H3C+T1A) - 2024	80° 開槽半沉頭清根 AB、ABR型自攻螺釘 80° Slotted Undercut Oval Countersunk Head Tapping Screws - Type AB、ABR
20	[美标] ASME B 18.6.3 (T7+T40) - 2013	82°開槽半沉頭 AB ABR 自攻螺釘 [Table 7] 82° Dimensions of Slotted Oval Countersunk Head Tapping Screws [Table 7]
21	[美标] ASME B 18.6.3 (T11t) - 2013	80° 開槽半沉頭清根自攻螺釘 [Table 11] 80° Slotted Undercut Oval Countersunk Head Tapping Screws [Table 11]
22	[美标] ASME B 18.6.5M (T12) - 2000 (R2010)	米制開槽半沉頭自攻釘 [Table 12] Metrice slotted raised countersunk head tapping screws [Table 12]
23	[美标] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 B,BP型 [Table 20] slotted Oval Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 20]
24	[美标] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 C型(統一螺紋) [Table 20] slotted Oval Countersunk Head Tapping Screws - Type C Thread Forming [Table 20]
25	[美标] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 AB型 [Table 20] slotted Oval Countersunk Head Tapping Screws - Type AB Thread Forming [Table 20]
26	[美标] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 A型 [Table 20] slotted Oval Countersunk Head Tapping Screws - Type A Thread Forming [Table 20]
27	[醫藥行業标準] YY 0018 (T6) - 2016	HC型開槽接骨螺釘 [Table 6] Metal bone Screw with Single-slot Recess, with Symmetrical Thread Form HC [Table 6]