會員中心 | English | 簡體中文

開槽小圓柱頭全柱端螺釘 CNS 4359 - 1980

選擇規格尺寸點擊↓

M1.4

M1.6

(M1.8)

M2.5

(M3.5)

M10

括号内尺寸為非優選

尺寸單位: mm

台灣CNS 4359 - 1980 CNS4359 4359CNS 開槽小圓柱頭全柱端螺釘

掃一掃分享

單重計算公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積最小破壞扭矩牌号等級毛坯直徑

螺紋規格
d

M1.4

M1.6

(M1.8)

M2.5

(M3.5)

M10

d_k
d_p	最大值
	最小值
c
k
n
r
t	最大值
	最小值
z

2	2.3	2.5	2.8	3.5	4	4.5	5.5	6.5	8	10	13
0.8	0.8	1	1.2	1.5	2	2.5	2.8	3.5	4.5	6	7.5
0.775	0.775	0.975	1.175	1.475	1.975	2.475	2.775	3.47	4.47	5.97	7.464
0.25	0.25	0.25	0.3	0.4	0.45	0.5	0.6	0.7	0.8	0.9	1.1
0.9	1	1.1	1.2	1.5	1.8	2	2.4	2.7	3.1	3.8	4.6
0.25	0.3	0.3	0.3	0.4	0.5	0.5	0.6	0.8	1	1.2	1.6
0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.2	0.2	0.25	0.4	0.4
0.6	0.7	0.75	0.8	0.95	1.15	1.3	1.5	1.6	1.9	2.4	2.8
0.45	0.5	0.55	0.6	0.75	0.9	1	1.2	1.3	1.5	1.9	2.3
0.6, 0.8, 1, 1.2	0.8, 1, 1.2, 1.6	0.8, 1, 1.2, 1.6	1, 1.2, 1.6, 2	1.2, 1.6, 2, 2.5	1.6, 2, 2.5, 3	1.6, 2, 2.5, 3	2, 2.5, 3, 4	2.5, 3, 4, 5	3, 4, 5, 6	4, 5, 6, 8	5, 6, 8, 10

①,a 按 CNS 4324。

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[國标] GB /T 2161 - 1991	機床夾具零件及部件六角頭壓緊螺釘 The Parts and Units of Jigs and Fixtures-hexagon Head Holddown Screw
2	[國标] GB /T 828 - 1988	開槽盤頭定位螺釘 Slotted Pan Head Set Screws with Dog Point
3	[德标] DIN 564 - 1995	小六角頭短圓柱截錐端緊定螺釘 Hexagon Set Screws with Small Hexagon，Half Dog Point and Flat Cone Point 供應商(1)
4	[德标] DIN 922 - 2024	開槽小盤頭圓柱端螺釘 Slotted Pan Head Screws with Small Head and Full Dog Point
5	[德标] DIN 922 - 2012	開槽小盤頭圓柱端螺釘 Slotted Pan Head Screws with Small Head and Full Dog Point
6	[德标] DIN 925 - 2012	開槽沉頭長圓柱端螺釘 Slotted Countersunk Head Screws With Dog Point (Flat Head)
7	[德标] DIN 922 - 2006	開槽小盤頭圓柱端螺釘 Slotted Pan Head Screws with Small Head and Full Dog Point
8	[德标] DIN 925 - 2006	開槽沉頭長圓柱端螺釘 Slotted Countersunk Head Screws with Full Dog Point
9	[德标] DIN 561 - 1995	六角頭圓柱端緊定螺釘 Hexagon Head Set Screws with Small Hexagon and Full Dog Point
10	[德标] DIN 922 - 1986	開槽圓頭球面圓柱端螺釘 Slotted Pan Head Screws with Ball Face and Full Dog Point
11	[德标] DIN 924 - 1986	開槽半沉頭柱端螺釘 Slotted Raised Countersunk Head Screws with Full Dog Point
12	[德标] DIN 925 - 1986	開槽沉頭長圓柱端螺釘 Slotted Countersunk Head Screws with Full Dog Point
13	[機械行業] JB /T 8006.2 - 1999	六角頭壓緊螺釘 Hexagon-headed Holddown Screw
14	[台灣] CNS 4655 - 1984	六角頭圓柱錐端緊定螺釘 Hexagon Head Set Screws with Half Dog Point and Cone End
15	[台灣] CNS 4654 - 1983	六角頭圓柱端緊定螺釘 CNS 4654-1983 Hexagon Head Set Screws with Dog Piont
16	[台灣] CNS 4412 - 1981	開槽沉頭圓柱端螺釘 Slotted Countersunk Head Screws with Dog Point
17	[台灣] CNS 4415 - 1981	開槽半沉頭圓柱端螺釘 Slotted Countersunk （Oval） Head Screws with Full Dog Point