會員中心 | English | 簡體中文

十二角頭螺栓 ISO螺紋 4h級 NF L 22-231 - 1987

選擇規格尺寸點擊↓

M5 ×0.8-4h

M6 ×1-4h

M7 ×1-4h

M8 ×1.25

M10 ×1.5-4h

M12 ×1.5-4h

尺寸單位: mm

法國NF L22-231 - 1987 NF22-231 22-231NF 十二角頭螺栓 ISO螺紋 4h級

掃一掃分享

公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積最小破壞扭矩牌号等級毛坯直徑

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

螺紋尺寸
d

M5
×0.8-4h

M6
×1-4h

M7
×1-4h

M8
×1.25

M10
×1.5-4h

M12
×1.5-4h

d_s	最大值=公稱
	最小值
s	最大值=公稱
	最小值
d_k	最大值=公稱
	最小值
d_p	最大值=公稱
	最小值
e	最小值
c	j14	公稱
k	j14	公稱
d₀	最大值=公稱
	最小值
M	最小值
	最大值
R	最大值
r

5	6	7	8	10	12
4.88	5.88	6.85	7.85	9.85	11.82
7	8	9	10	12	14
6.78	7.78	8.78	9.78	11.73	13.73
9.5	10.5	12	13.5	16.5	19.5
9.35	10.32	11.82	13.32	16.32	19.29
3.8	4.5	5.5	6.2	7.9	9.9
3.3	4	5	5.7	7.4	9.4
7.8	8.9	10	11.2	13.4	15.6
1.1	1.2	1.2	1.5	2	2.2
5.5	6	6.5	7	8	9.2
3.7	4.6	5.4	5.7	7.2	8.5
2.7	3.6	4.4	4.7	6.2	7.5
2.5	2.8	3.3	3.7	4.7	5.6
2.9	3.2	3.7	4.1	5.1	6
0.6	0.6	0.8	0.8	1	1.2
0.2~0.4	0.5~0.7	0.5~0.7	0.5~0.7	0.6~0.8	0.6~0.8

千件鋼制重≈kg

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 12603 - 2005

金屬熱處理工藝分類及代号

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[美标] IFI 115 - 2002	帶法蘭面的12角螺栓 Flange 12-Point Screws 供應商(4)
2	[德标] DIN 74361 - 2 (G) - 2008	六角頭球面輪毂螺栓 G型 Ball Collar Screw - Type G
3	[德标] DIN 65438 - 1993	MJ螺紋钛合金十二角法蘭螺栓 Aerospace; Bihexagonal Head Bolts, Close Tolerance, with Mj-thread, Short Thread Length, In Titanium Alloy; Nominal Tensile Strength 1100 Mpa, for Temperatures up to 315 °c
4	[德标] DIN 74361 - 2 (D, E) - 1982	輪毂螺栓，D型，E型 Wheel Bolts - Type D, E
5	[國際] ISO 3186 - 2008	航空航天系列标準杆短或中等長度MJ螺紋雙六角頭螺栓 1250MPa～1800MPa Aerospace - Bolts, Large Bihexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes 1250 Mpa to 1800 Mpa
6	[國際] ISO 9255 - 2008	12角法蘭面螺釘 - 中短MJ螺紋 - 強度等級小于等于1100MPa Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa
7	[國際] ISO 9254 - 1993	12角（十二鍵）法蘭面螺釘 - 長MJ螺紋 - 強度等級小于等于1100MPa Aerospace - Bolts, Normal Spline Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa
8	[日标] JIS /JASO C 610 (T1) - 1979	汽車輪毂用螺栓 [Table 1] Center Rib 1st Class Bolts of Automobiles
9	[日标] JIS /JASO C 610 (T2) - 1979	汽車輪毂螺栓 [Table 2] Center Rid 2nd Class Bolts of Automobiles
10	[日标] JIS /JASO C 610 (T3) - 1979	汽車輪毂螺栓 [Table 3] Center Rid 3rd Class Bolts of Automobiles
11	[機械行業] JB /T 6686 - 1993	12角頭法蘭面螺栓 12-spline Flange Bolts 供應商(2)
12	[歐标] EN 2874 - 1996	航空航天 - 大雙六角頭螺栓，緊公差普通杆，中等長度螺紋，耐熱鎳基鋼，鈍化 - 等級：1550MPa（室溫）/315℃ Aerospace Series - Bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Passivated - Classfication: 1550 MPa (at Ambient Temperature)/315℃
13	[美标] SAE AS 9556 (C) - 2007	十二角法蘭面螺釘耐腐蝕耐熱鋼 UNJF-3A Bolt, Machine-double Hexagon Extended Washer Head. Corrosion and Heat Resistant Steel. UNS S66286 130 KSI Min. 1900-32 UNJF-3A
14	[美标] SAE AS 3236 (B) - 2002	十二角法蘭螺栓 PD柄、CRES、UNS N07718、最小185 ksi、1900-32 UNJF-3A (R) Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, CRES, UNS N07718, 185 KSI Min, .1900-32 UNJF-3A
15	[美标] SAE J 58 - 1998	十二角法蘭螺栓 Bihexagonal Head Bolts with Flange
16	[美标] SAE AS 3243 - 1980	十二角法蘭面縮杆螺釘 Bolt, Machine-Double Hex Extended Washed Head, Drilled, PD Shank, MS 5662, 0.1900-32 UNJF-3A
17	[汽标] QC /T 1104 - 2019	12角頭耐熱螺栓 12-Point Head Heat Resistant Bolts
18	[美标] ASME B 18.2.5M - 2013	十二角法蘭螺栓 (12.9 / ASTM F468M) 12-Point Flange Head Screws (12.9 / ASTM F468M) 供應商(2)
19	[美标] ASME B 18.2.5M - 2009	十二角法蘭螺栓 (12.9 / ASTM F468M) 12-Point Flange Head Screws (12.9 / ASTM F468M) 供應商(2)
20	[美标] ASME B 18.2.7.1M - 2002 (R2009)	米制十二鍵槽凸緣螺栓 Metric 12-spline Flange Screws
21	[美标] ASME B 18.2.7.1M - 2002 (R2007)	米制十二花鍵法蘭螺釘 [Table 4] Metric 12-Spline Flange Screws
22	[航空] HB 6900 - 1993	十二角頭螺栓 Spline Head Bolts, MJ Threads
23	[航空] HB 6901 - 1993	十二角頭螺栓 Spline Head Bolts, MJ Threads
24	[浙江制造團體标準] T/ZZB 1669 - 2020	汽車車輪用高強度輪毂螺栓 High-strength Fillister Head Hub Bolts for Automotive Wheels 供應商(1)