會員中心 | English | 簡體中文

梅花槽82°沉頭 AB ABR自攻螺釘 ASME B 18.6.3 (H1B-VI+T1A) - 2024

選擇規格尺寸點擊↓

10#

12#

1/4

5/16

3/8

7/16

1/2

ASME B 18.6.3 (H1B-VI+T1A) - 2024 梅花槽82°沉頭 AB ABR自攻螺釘

尺寸單位: inch

美标ASME B18.6.3 (H1B-VI+T1A) - 2024 ASME1 梅花槽82°沉頭 AB ABR自攻螺釘

掃一掃分享

公差

螺紋尺寸
d

10#

12#

1/4

5/16

3/8

7/16

1/2

d	公稱
PP
槽号
M	參考值
P	最大值
	最小值
d_k	最大值
	最小值
k	參考值
α	最大值
	最小值
L₀ ^④	公稱
Y ^④	螺紋過渡長度(全螺紋)	最大值
b ^④	螺紋長度 (長螺釘)	最小值

0.0730	0.0860	0.0990	0.1120	0.1250	0.1380	0.1510	0.1640	0.1900	0.2160	0.2500	0.3125	0.3750	0.4375	0.5000
42	32	28	24	20	20	19	18	16	14	14	12	12	10	10
T5	T6	T8	T8	T10	T10	T15	T15	T20	T25	T27	T40	T40	T50	T50
0.058	0.069	0.094	0.094	0.111	0.111	0.132	0.132	0.155	0.178	0.200	0.266	0.266	0.352	0.352
0.017	0.022	0.025	0.033	0.045	0.045	0.045	0.051	0.065	0.070	0.090	0.105	0.135	0.125	0.135
0.012	0.017	0.020	0.028	0.035	0.035	0.035	0.040	0.050	0.055	0.075	0.087	0.115	0.105	0.120
0.137	0.162	0.187	0.212	0.237	0.262	0.287	0.312	0.362	0.412	0.477	0.597	0.717	0.760	0.815
0.120	0.144	0.167	0.191	0.215	0.238	0.262	0.285	0.333	0.380	0.442	0.556	0.670	0.715	0.765
0.043	0.051	0.059	0.067	0.075	0.083	0.091	0.100	0.116	0.132	0.153	0.191	0.230	0.223	0.223
80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°
82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°
9/16	5/8	3/4	13/16	15/16	1	1-1/8	1-1/4	1-3/8	1-5/8	1-13/16	1-13/16	1-7/8	1-7/8	1-7/8
0.024	0.031	0.036	0.042	0.050	0.050	0.053	0.056	0.062	0.071	0.071	0.083	0.083	0.100	0.100
0.440	0.520	0.590	0.670	0.750	0.830	0.910	0.980	1.140	1.300	1.500	1.500	1.500	1.500	1.500

①, 若以小數規定公稱直徑，應省略小數前和小數點後第四位的零。
②,螺釘末端釘尖上不允許因螺紋輾壓而形成的虛尖，允許略帶圓弧或圓鈍形末端。
③,小于等于8#的螺釘，螺紋牙頂平面寬度不應超過0.004in，大于8#的應不超過0.006in。
④,正常情況下，當螺釘長度小于等于其公稱長度L0時應采用全螺紋，過渡螺紋長度應小于等于Y；若螺釘長度大于其公稱長度L0可采用半牙型式，但其螺紋長度應不小于b。

替代列表

ASME B 18.6.3T2-VI+T40 - 2013 ASME B 18.6.3H1B-VI+T1A - 2024

長度公差

　　Tapping screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 1/2 in. long, 1/8 in. for screws over 1/2 in. through 1-1/2 in. long, 1/4 in. for screws over 1-1/2 in. through 3 in. long, and 1/2 in. for screws over 3 in. long.

類型	标稱螺釘長度	長度公差
A、AB、BP	≤1	±0.03
A、AB、BP	＞1	±0.05
B、BF、BT、C、D、F、G、T、TRS	≤3/4	-0.03
	＞3/4,≤1-1/2	-0.05
	＞1-1/2	-0.06

引用參考

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 5280 - 2002

自攻螺釘用螺紋

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[國标] GB /T 2670.1 - 2017	内六角花形盤頭自攻螺釘 Hexalobular Socket Pan Head Tapping Screws 供應商(2)
2	[國标] GB /T 2670.2 - 2017	内六角花形沉頭自攻螺釘 Hexalobular Socket Countersunk Head Tapping Screws 供應商(1)
3	[國标] GB /T 2670.3 - 2017	内六角花形半沉頭自攻螺釘 Hexalobular Socket Raised Countersunk(Oval) Head Tapping Screws 供應商(1)
4	[國标] GB /T 2670.1 - 2004	内六角花形盤頭自攻螺釘 Hex lobular socket pan head tapping screws 供應商(2)
5	[國标] GB /T 2670.2 - 2004	内六角花形沉頭自攻螺釘 Hexalobular Socket Countersunk Head Tapping Screws 供應商(1)
6	[國标] GB /T 2670.3 - 2004	内六角花形半沉頭自攻螺釘 Hexalobular Socket Raised Countersunk(Oval) Head Tapping Screws 供應商(1)
7	[德标] DIN 34819 - 2008	梅花槽圓頭凸緣（華司）自攻釘 Hexalobular Socket Raised Head Tapping Screws With Collar
8	[國際] ISO 14585 - 2011	梅花槽盤頭自攻螺釘 Hexalobular Socket Pan Head Tapping Screws 供應商(3)
9	[國際] ISO 14586 - 2011	梅花槽沉頭自攻螺釘 Hexalobular Socket Countersunk Head Tapping Screws 供應商(1)
10	[國際] ISO 14585 - 2001	梅花槽圓頭自攻螺釘 Hexalobular Socket Pan Head Tapping Screws 供應商(3)
11	[國際] ISO 14586 - 2001	梅花槽沉頭自攻螺釘 Hexalobular Socket Countersunk Head Tapping Screws 供應商(1)
12	[國際] ISO 14587 - 2011	梅花槽半沉頭自攻螺釘 Hexalobular Socket Raised Countersunk（Oval） Head Tapping Screws
13	[國際] ISO 14587 - 2001	梅花槽半沉頭自攻螺釘 Hexalobular socket raised countersunk（oval） head tapping screws
14	[日标] JIS B 1128 (O) - 2004	梅花槽半沉頭自攻螺釘 Hexalobular Socket Raised Countersunk Head Self-Tapping Screws
15	[日标] JIS B 1128 (F) - 2004	梅花槽沉頭自攻釘 Hexalobular Socket Countersunk Head Self-Tapping Screws
16	[日标] JIS B 1128 (P) - 2004	梅花槽盤頭自攻釘 Hexalobular Socket Pan Head Self-Tapping Screws
17	[汽标代号] Q 27A	内六角花形盤頭自攻螺釘 Hex lobular socket pan head tapping screws
18	[汽标代号] Q 27B	内六角花形沉頭自攻螺釘 Hexalobular socket countersunk head tapping screws
19	[汽标代号] Q 27C	内六角花形半沉頭自攻螺釘 Hex lobular socket raised countersunk head tapping screws
20	[汽标代号] Q 2A2	塑料用内六角花形盤頭自攻螺釘 Hexalobular socket pan head tapping screws for plastic
21	[法國] NF E 25-652 - 2001	梅花槽沉頭自攻螺釘 Hexalobular Socket Countersunk Head Tapping Screws
22	[法國] NF E 25-653 - 2001	梅花槽半沉頭自攻螺釘 Hexalobular Socket Raised Countersunk（Oval） Head Tapping Screws
23	[法國] NF E 25-654 - 2001	梅花槽盤頭自攻釘 Hexalobular Socket Pan Head Tapping Screws
24	[企标] YJT 4025 (WN 5451)	塑料用梅花槽圓頭帶介自攻螺釘【DELTA PT 螺紋】 Round Washer Head with TORX PLUS Self-tapping Screw [DELTA PT Thread] 供應商(1)
25	[企标] YJT 4052	梅花槽水泥釘003 (T30) 供應商(1)
26	[企标] YJT 4059 (WN1423C-1)	梅花槽沉頭自攻螺釘 Hexalobular Socket countersunk head Tapping screws 供應商(1)
27	[企标] YJT 4060 (WN1423C-2)	梅花槽沉頭自攻螺釘 Hexalobular Socket countersunk head Tapping screws 供應商(1)
28	[企标] YJT 4065 (WN1451C)	梅花槽盤頭帶墊自攻螺釘 Hexalobular socket Pan Head Tapping Screws With Collar 供應商(1)
29	[企标] YJT 4066 (WN1452C)	梅花槽盤頭自攻釘 exalobular Socket Pan Head Self-Tapping Screws 供應商(1)
30	[企标] YJT 4083 (WN5452)	塑料用梅花槽盤頭自攻螺釘 [DELTA PT 螺紋] Pan Head with TORX PLUS Self-tapping Screw [DELTA PT Thread] 供應商(1)
31	[企标] YJT 4067 (WN1453C)	梅花槽半沉頭自攻螺釘 Hexalobular Socket Raised Countersunk（Oval） Head Tapping Screws
32	[德标] DIN EN ISO 14587 - 2011	内六角花形半沉頭自攻螺釘 Hexalobular Socket Raised (Oval) Head Tapping Screws
33	[德标] DIN EN ISO 14585 - 2002	内六角花形盤頭自攻螺釘 Hexagon Socket Pan Head Tapping Screws
34	[德标] DIN EN ISO 14586 - 2002	内六角花形沉頭自攻螺釘 Hexalobular Socket Countersunk Head Tapping Screws
35	[汽标] QC /T 878 - 2011	塑料用内六角花形盤頭自攻螺釘 Hexalobular socket pan head tapping screws for plastic 供應商(1)
36	[美标] ASME B 18.6.3 (H2B-VI+T1A) - 2024	梅花槽半沉頭 AB ABR自攻螺釘 Hexalobular socket raised countersunk head tapping screws - Type AB and ABR
37	[美标] ASME B 18.6.3 (H5C-VI+T1A) - 2024	梅花槽盤頭 AB ABR自攻螺釘 Hexalobular Socket Pan Head Tapping Screws - Type AB and ABR
38	[美标] ASME B 18.6.3 (H6B-VI+T1A) - 2024	梅花槽球面扁圓柱頭 AB ABR自攻螺釘 Cheese Head Tapping Screws with Hexalobular Slot - Type AB and ABR
39	[美标] ASME B 18.6.3 (H7B-VI+T1A) - 2024	梅花槽大扁頭 AB ABR自攻螺釘 Mushroom Head Tapping Screws with Hexalobular Slot - Type AB and ABR
40	[美标] ASME B 18.6.3 (H12B-VI+T1A) - 2024	梅花槽圓頭凸緣 AB ABR自攻螺釘 Hexalobular Socket Round Head Tapping Screws With Collar - Type AB and ABR
41	[美标] ASME B 18.6.3 (T2-VI+T40) - 2013	梅花槽82°沉頭 AB ABR自攻螺釘 82° Countersunk head with hexalobular slot tapping screws - Type AB (ABR)
42	[美标] ASME B 18.6.3 (T8-VI+T40) - 2013	梅花槽半沉頭 AB ABR自攻螺釘 Hexalobular socket raised countersunk head tapping screws - Type AB and ABR
43	[美标] ASME B 18.6.3 (T19-VI+T40) - 2013	梅花槽盤頭 AB ABR自攻螺釘 Hexalobular Socket Pan Head Tapping Screws - Type AB and ABR
44	[美标] ASME B 18.6.3 (T22-VI+T40) - 2013	梅花槽球面扁圓柱頭 AB ABR自攻螺釘 Cheese Head Tapping Screws with Hexalobular Slot - Type AB and ABR
45	[美标] ASME B 18.6.3 (T25-VI+T40) - 2013	梅花槽大扁頭 AB ABR自攻螺釘 Mushroom Head Tapping Screws with Hexalobular Slot - Type AB and ABR
46	[美标] ASME B 18.6.3 (T39-VI+T40) - 2013	梅花槽圓頭凸緣 AB ABR自攻螺釘 Hexalobular Socket Round Head Tapping Screws With Collar - Type AB and ABR
47	[日本汽車工業協會标準] JASO F 116 - 2005	梅花槽盤頭自攻螺釘 T-type TORX pan head tapping screws
48	[日本汽車工業協會标準] JASO F 116 - 2005	梅花槽沉頭自攻螺釘 T-type TORX countersunk head tapping screws
49	[日本汽車工業協會标準] JASO F 116 - 2005	梅花槽半沉頭自攻螺釘 T-type TORX raised countersunk head tapping screws
50	[日本汽車工業協會标準] JASO F 116 - 2005	梅花槽扁圓頭自攻螺釘 T-type TORX truss countersunk head tapping screws
51	[日本汽車工業協會标準] JASO F 116 - 2005	梅花槽盤頭帶墊自攻螺釘 T-type TORX collar head tapping screws