會員中心 | English | 簡體中文

帶安全閉鎖裝置的8級鋼制鍛造起重吊鉤 ISO 7597 - 2013

選擇規格尺寸點擊↓

尺寸單位: mm

國際ISO 7597 - 2013 ISO7597 7597ISO 帶安全閉鎖裝置的8級鋼制鍛造起重吊鉤

掃一掃分享

公差

代号

工作極限載荷WLL	(噸)
D	最小值
D₀	最小值
D₁	最小值
F	最小值
H	最大值
L	最大值

0.25	0.5	0.8	1.12	1.5	2	2.5	3.15	3.75	5.3	6	8
11	15	19	22	26	30	34	38	42	49	52	60
8	11	14	17	20	23	26	29	32	37	40	46
8	11	14	16	18	21	24	27	30	35	37	43
6	8	10	12	14	16	18	20	23	26	28	32
12	17	21	25	29	34	38	43	48	55	59	68
8	11	14	17	20	23	26	29	32	37	40	46

代号

工作極限載荷WLL	(噸)
D	最小值
D₀	最小值
D₁	最小值
F	最小值
H	最大值
L	最大值

10	11.2	12.5	15	16	20	21.2	25	31.5	40	50	63
67	71	75	82	85	95	98	106	119	134	150	168
51	54	57	63	65	72	75	81	91	102	115	129
48	51	53	58	60	68	70	76	85	96	107	120
36	38	40	44	46	51	52	57	64	72	81	90
76	80	85	93	96	107	111	120	135	152	170	190
51	54	57	63	65	72	75	81	91	102	115	129

①,直接與鋼絲繩吊索和編織吊索聯接時，為滿足聯接和相關運動要求，尺寸F需要大于表中給出的最小值。
②,吊鉤鉤尖實際高度B不應小于開口尺寸D0。
③,吊鉤開口尺寸D0不應超過鉤腔實際直徑D的95%。
④,吊鉤安全閉鎖裝置應在實際開口尺寸D1裝入最大直徑的圓棒後仍能自然複位。

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍镉、複合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

注：技術數據僅供參考，請以官方原件為準！

類似标準及供貨信息

1	[國标] GB /T 25854 (Dee) - 2010	一般起重用 - D形卸扣 Forged shackles for general lifting purposes - Dee shackles 供應商(1)
2	[國标] GB 24814 - 2009	起重用短環鏈吊鏈等用4級普通精度鏈 Short link chain for lifting purposes - Grade 4, non-calibrated, for chain slings etc. 供應商(1)
3	[國标] GB /T 5974.1 - 2006	鋼絲繩用普通套環 General purpose thimbles for use with steel wire ropes 供應商(1)
4	[國标] GB /T 8918 - 2006	重要用途鋼絲繩 Steel wire ropes for important purposes 供應商(2)
5	[國标] GB /T 17116.3 - 2018	短型螺旋扣
6	[國标] GB /T 17116.3 - 2018	長型螺旋扣
7	[國标] GB /T 17116.3 - 2018	拉撐杆
8	[國标] GB /T 17116.3 - 2018	銷座
9	[國标] GB /T 17116.3 - 2018	焊接倒U型吊闆
10	[國标] GB /T 17116.3 - 2018	栓接倒U型吊闆
11	[國标] GB 24813 - 2018	帶安全閉鎖裝置的8級鋼制鍛造起重吊鉤 Forged Steel Lifting Hooks With Latch, Grade 8
12	[國标] GB /T 10051.5 - 2010	起重吊鉤 - 不帶凸耳的直柄單鉤 LM型和LY型 Lifting Hooks - Shank Hooks With Point - Type LM and LY
13	[國标] GB /T 10051.5 - 2010	起重吊鉤 - 帶凸耳的直柄單鉤 LMD型和LYD型 Lifting Hooks - Shank Hooks With Point - Type LMD and LYD
14	[國标] GB /T 25854 (Bow) - 2010	一般起重用 - 弓形卸扣 Forged shackles for general lifting purposes - Bow Shackle
15	[國标] GB /T 5976 - 2006	鋼絲繩夾 Wire Rope Grips
16	[國标] GB /T 547 (A) - 1994	D型卸錨扣 Anchor shackle-D type
17	[國标] GB /T 547 (B) - 1994	馬蹄形錨卸扣 Anchor shackle-U-shaped
18	[國标] GB 10051.5 - 1988	起重吊鉤 - 不帶凸耳的直柄單鉤 LM型和LY型 Lifting Hooks - Shank Hooks With Point - Type LM and LY
19	[國标] GB 10051.5 - 1988	起重吊鉤 - 帶凸耳的直柄單鉤 LMD型和LYD型 Lifting Hooks - Shank Hooks With Point - Type LMD and LYD
20	[德标] DIN 1478 - 2005	鋼管材或鋼棒材制套筒螺母 Turnbuckles made from steel tubes or round steel bars 供應商(1)
21	[德标] DIN 1480 - 2005	模鍛花蘭，開放式 Forged Turnbuckles, (Open Type) 供應商(1)
22	[德标] DIN 5299 (D) - 1980	彈簧鉤 D型 Snap Hook Round Wire and Forged - Form D 供應商(1)
23	[德标] DIN 5299 (E) - 1980	彈簧鉤 E型 Snap Hook Round Wire and Forged - Form E 供應商(1)
24	[德标] DIN 1478 - 1975	鋼管材或鋼棒材制套筒螺母 Turnbuckles made from steel tube or round steel bar 供應商(1)
25	[德标] DIN 1480 - 1975	花籃螺栓 Turnbuckles 供應商(1)
26	[德标] DIN 82101 - 2005	優質非合金鋼D形直卸扣 Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels
27	[德标] DIN 82103 - 2005	不鏽鋼焊接直卸扣 (馬蹄形卸扣) Components for liftig,towing,lashing—Shackle,bow-Stainless steels
28	[德标] DIN 763 - 1990	不按量規檢驗的長環節圓鋼鏈 Tested, non-calibrated, long-link round steel chains
29	[德标] DIN 82103 - 1987	不鏽鋼焊接直卸扣 (馬蹄形卸扣) Components for liftig,towing,lashing—Shackle,bow-Stainless steels
30	[德标] DIN 1142 - 1982	滿足安全要求的鋼絲繩卡頭 Wire Rope Grips For Rope Terminations; To Meet Safety Requirements
31	[德标] DIN 5299 (A) - 1980	彈簧鉤 A型 Snap Hook Half-round Wire - Form A
32	[德标] DIN 5299 (B) - 1980	彈簧鉤 B型 Snap Hook Round Wire and Forged - Form B
33	[德标] DIN 5299 (C) - 1980	彈簧鉤 C型 Snap Hook Round Wire and Forged - Form C
34	[德标] DIN 82101 - 1976	優質非合金鋼D形直卸扣 Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels
35	[德标] DIN 741 - 1972	電纜端部連接用鋼絲繩夾 Wire rope clamps for cable end connections
36	[德标] DIN 82004 - 1972	A型花籃 Turnbuckles - Form A
37	[德标] DIN 82004 - 1972	B型花籃 Turnbuckles - Form B
38	[德标] DIN 82004 - 1972	C型花籃 Turnbuckles - Form C
39	[德标] DIN 82004 - 1972	D型花籃 Turnbuckles - Form D
40	[德标] DIN 82004 - 1972	E型花籃 Turnbuckles - Form E
41	[德标] DIN 82004 - 1972	花籃套筒 Clamp nut
42	[德标] DIN 48051-1 (SBM) - 1959	SBM 型鉤型絕緣子支柱 Overhead lines Curved insulator supports - standard design -SBM
43	[德标] DIN 48051-1 - 1959	SBD 型鉤型絕緣子支柱 Overhead lines Curved insulator supports - standard design -SBD
44	[國際] ISO 2415 (Dee) - 2022	一般起重用鍛造卸扣 - D形卸扣 Forged shackles for general lifting purposes — Dee shackles
45	[國際] ISO 2415 - 2022	一般起重用 - 弓形卸扣 Forged shackles for general lifting purposes - Bow Shackle
46	[日标] JIS B 2809 (MS) - 2018	MS型U型螺栓 U Shape Bolts (Type MS) 供應商(1)
47	[日标] JIS B 2809 (MS) - 1977	MS型U型螺栓 U Shape Bolts (Type MS) 供應商(1)
48	[日标] JIS B 2809 (MR) - 2018	MR型U型螺栓 U Shape Bolts (Type MR)
49	[日标] JIS B 2809 (F) - 2018	F型U型螺栓 U Shape Bolts (Type F)
50	[日标] JIS A 5540 - 2008	建築用索具 Table A.3 Turnbuckle Building, Thread Strap Bolt, Carbon steel and hot-dip zinc coated carbon steel
51	[日标] JIS A 5540 - 2008	建築用索具花籃 Table A.4 Longer Thread Strap Bolt, Carbon steel and hot-clip zinc coated carbon steel
52	[日标] JIS A 5540 - 2008	建築用索具花籃 Table A.5 Thread Strap Bolt, Carbon steel and hot-clip zinc coated carbon steel
53	[日标] JIS A 5540 - 2008	建築用索具花籃 Table A.6 Longer Thread Strap Bolt, Carbon steel and hot-clip zinc coated carbon steel
54	[日标] JIS A 5540 - 2008	建築用索具花籃不鏽鋼 Table A.8 Stainless Steel Thread Strap Bolt
55	[日标] JIS A 5540 - 2008	建築用索具花籃不鏽鋼 Table A.9 Longer Stainless Steel Thread Strap Bolt
56	[日标] JIS A 5541 - 2008	建築用花蘭主體 - 碳鋼制及熱浸鋅碳鋼制 Body of Turnbuckle for Building - Carbon Steel Products and Hot-dip Zinc Coated Carbon Steel Products
57	[日标] JIS A 5541 - 2008	建築用花蘭主體 - 不鏽鋼制 Body of Turnbuckle for Building - Stainless Steel Products
58	[日标] JIS A 5542 (1A) - 2003	建築用花蘭螺杆 - 單孔長平頭螺杆 [碳鋼, 熱鍍鋅碳鋼制] Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
59	[日标] JIS A 5542 (1B) - 2003	建築用花蘭螺杆 - 雙孔長平頭螺杆 [碳鋼, 熱鍍鋅碳鋼制] Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
60	[日标] JIS A 5542 (2A) - 2003	建築用花蘭螺杆 - 吊環螺杆 [碳鋼制] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
61	[日标] JIS A 5542 (2B) - 2003	建築用花蘭螺杆 - 吊環螺杆 [碳鋼制] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
62	[日标] JIS A 5542 (3) - 2003	建築用花蘭螺杆 - 雙頭螺杆 [碳鋼制] Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products]
63	[日标] JIS A 5542 (4) - 2003	建築用花蘭螺杆 - 不鏽鋼長平頭螺杆 Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt
64	[日标] JIS A 5542 (A1A) - 2003	建築用軋鋼制花蘭螺杆 - 單孔長平頭螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
65	[日标] JIS A 5542 (A1B) - 2003	建築用軋鋼制花蘭螺杆 - 雙孔長平頭螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
66	[日标] JIS A 5542 (A2A) - 2003	建築用軋鋼制花蘭螺杆 - 吊環螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
67	[日标] JIS A 5542 (A2B) - 2003	建築用軋鋼制花蘭螺杆 - 吊環螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
68	[日标] JIS B 2801 - 1996	直形卸扣 SA、SB和SC型 Straight Shackle Body - Form SA, SB and SC
69	[日标] JIS B 2801 - 1996	卸扣 BD型 Shackle body - Form BD
70	[日标] JIS B 2801 - 1996	卸扣 SD型 Shackle body - Form SD
71	[日标] JIS B 2801 - 1996	卸扣 BA、BB和BC型 Bow Shackle Body - Form BA, BB and BC
72	[日标] JIS B 2809 (MR) - 1977	MR型U型螺栓 U Shape Bolts (Type MR)
73	[日标] JIS B 2809 (FS) - 1977	FS型U型螺栓 Wire clip for wire strand, Type FS
74	[日标] JIS B 2809 (FR) - 1977	FR型U型螺栓 U Shape Bolts (Type FR)
75	[機械行業] JB /ZQ 4333 - 2006	螺旋扣 Turnbuckle
76	[機械行業] JB /T 8025 - 1999	起重螺栓 Lifting Bolt
77	[歐标] EN 13411-5 (A1) - 2003	U形螺栓鋼絲繩夾具 - 鋼絲繩繩夾（卡頭） U-Bolt Wire Rope Grips 供應商(2)
78	[歐标] EN 13889 (Dee) - 2008	一般起重用卸扣鍛鋼 6級 — D形 Forged steel shackles for general lifting purposes - Dee shackles
79	[歐标] EN 13889 (Bow) - 2008	一般起重用鍛鋼卸扣 — 弓形 Forged steel shackles for general lifting purposes - Bow shackles
80	[歐标] EN 13411-5 (A2) - 2003	U形螺栓鋼絲繩夾具 - 鋼絲繩繩夾（卡頭）- 夾座 U-Bolt Wire Rope Grips - Bridge
81	[歐标] EN 13411-5 (A4) - 2003	U形螺栓鋼絲繩夾具 - 鋼絲繩繩夾（卡頭）- 帶頸螺母 U-Bolt Wire Rope Grips - Collar nut
82	[歐标] EN 1677-3 - 2001 (+A1:2008)	環眼自鎖鉤，鍛造，8級 Forged Steel Self-locking Hooks - Grade 8
83	[歐标] EN 1677-5 - 2001 (+A1:2008)	環眼吊鉤，帶安全閉鎖裝置，鍛鋼，4級 Forged Steel Lifting Hooks with Latch, Grade 4
84	[歐标] EN 1677-2 - 2000 (+A1:2008)	環眼吊鉤，帶安全閉鎖裝置，鍛鋼，8級 Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8
85	[化工] HG /T 21629 (A14) - 2021	U形吊耳
86	[化工] HG /T 21629 (A15) - 2021	花籃螺母
87	[化工] HG /T 21629 (A16) - 2021	U形螺母
88	[化工] HG /T 21629 (A30) - 2021	單孔U形吊耳
89	[化工] HG /T 21629 (A31) - 2021	單孔長吊闆
90	[企标] YJT 17002	D形卸扣 G210 Shackle G210 供應商(1)
91	[企标] YJT 17018	國标B型卡頭 National standard B wire rope clips 供應商(1)
92	[企标] YJT 17024 (DIN 1480)	DIN 1480 花蘭 DIN 1480 Turnbuckles 供應商(1)
93	[企标] YJT 17028	G80 焊接型吊環/吊點 G80 Weld-on Pivot Link (N6-G100) 供應商(1)
94	[企标] YJT 17031	快速連接環 Connect Ring 供應商(1)
95	[企标] YJT 13010	固定鎖牌 (船栓座) Fixed lock plate
96	[企标] YJT 1601	卡纜
97	[企标] YJT 17001 (Fist Grip)	鋼絲繩卡頭 G-429 Wire Rope Clips G-429
98	[企标] YJT 17003	馬蹄形卸扣 G213 Shackle G213
99	[企标] YJT 17004	馬蹄形卸扣 G2130 Shackle G2130
100	[企标] YJT 17005	D形卸扣 G215 Shackle G215