GB /T 902.4 (PS) - 2010 Threaded Studs with Flange for Short-cycle Drawn Arc Stud Welding - PS Type Threaded Stud with Flanged

Unit: 毫米(mm)

Thread Size
d

P	Pitch
d_k	max
d_k	min
k	max
k	min
n	max
a

0.5	0.7	0.8
4.2	5.2	6.2
3.8	4.8	5.8
1.4	1.4	1.4
0.7	0.7	0.7
0.6	0.6	1
166°	166°	166°

per 1000 units ≈ kg(7.85kg/cm3)

①,L1:
M3：6,8,10,12,16,20
M4：8,10,12,16,20,25
M5：10,12,16
M6：20,25,30
M8：12,16,20,25,30,35,40
M10：16,20,25,30,35,40

IFI 148 (U3) - 2002

Type U3 Projection Weld Studs

IFI 148 (UR) - 2002

Type UR Projection Weld Studs

IFI 148 (UC4) - 2002

Type UC4 Projection Weld Studs

IFI 148 (T3) - 2002

Type T3 Projection Weld Studs

IFI 148 (US3) - 2002

Heavy Duty Type US3 Projection Welding Studs

IFI 148 (TC4) - 2002

Flat Round Head with Rings on Undertake Surface Welding Screws

IFI 148 (TUS3) - 2002

Type TUS3 Projection Weld Studs

IFI 148 (TD) - 2002

Type TD Projection Weld Studs

DIN 34817 - 2017

Weld Screws with Metric Thread

DIN 34817 - 2001

Weld Screws with Metric Thread

DIN 32501-1 (GA) - 1991

Studs for Stud Welding with Tip Ignition; Threaded Bolt

JIS B 1195 - 2009

Flat Round Head Weld Bolts

JIS B 1195 - 1994

Flat Head Welding Screws

Q 198

Weld Screws, Type A
Suppliers(1)

Q 198B

Weld Screws, Type B

Q 198C

Weld Screws, Type C
Suppliers(1)

Q 199

Overhead Projection Weld Bolts - Type A

Q 199B

Overhead Projection Weld Bolts - Type B

Q 2A8

Welding Screws for Plastic

BS 7670-1 - 1993

Screws for Resistance Projection Welding [Table 1]

KS B 1057 - 2001

Flat Round Head Weld Screws

YJT 1005

Spot Welding Stud (ANSI/ASME/IFI)

QC /T 598 (A) - 1999

Weld Bolts, Type A

QC /T 599 (A) - 2013

Overhead Projection Weld Bolts - Type A

QC /T 599 (B) - 2013

Overhead Projection Weld Bolts - Type B

QC /T 891 - 2011

Welding Screws for Plastic

QC /T 598 (B) - 1999

Weld Bolts, Type B

QC /T 598 (C) - 1999

Weld Bolts, Type C

QC /T 599 (B) - 1999

Overhead Projection Weld Bolts - Type B

QC /T 599 (A) - 1999

Overhead Projection Weld Bolts - Type A

GB	GB /T 902.4(PS)
ISO	ISO 13918(PS)
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

Wuxi Zeke Hardware Manufacturing Co., Ltd.
Contact:	Mr.Chen
Cellphone：	+86-18651586798
QQ：	531792923
email：	wxzeke@163.com
Material: Zirconium Zr-1(R60700), Zr-3(R60702), Zr-5(R60705), Zr-0(R60001), Zr-2(R60802), Zr-4(R60804), Titanium TA1-TA36, TB2-TB17, TC1-TC32, Corrosion resistant alloy Incoloy 800, 800H, 800HT, 825, 925, Hastelloy B, B-2, B-3, B-4, C, C276, C-4, C-22, G-50, X, G, G-3, G-30, C-2000, Inconel600, 601, 690, 625, 622, 686, 718, 703, X750, Monel400, Monel K500, Pure nickel Nickel 200, Nickel 201, High-temperature alloy Nimonic 75, 80A, 90, 901, 20Cb-3 alloy, A286(Gr660), Cr20Ni80, Super stainless steel XM-19, 254SMO(F44), 1.4529, 25-6MO, 303, 304, 304L, 309, 309L, 310, 310S, 316, 316L, 316Ti, 904L, 317, 317L, 321, 347, Duplex stainless steel 2205(F51、F60), 2507(F53), S32760(F55), 1Cr13, 2Cr13, 3Cr13, 630(17-4PH), 631(17-7PH), 660, Grade: 8.8, 10.9, 12.9, 14.9, A2-70, A2-80, A3-70, A3-80, A4-70, A4-80, A4L-80, A5-80, D2-70, D2-80, D2-100, D4-70, D4-80, D4-100, D6-70, D6-80, D6-100, D8-70, D8-80, D8-100, C1-70, C1-110, C4-70, C3-80, F1-45, F1-60 High temperature and high pressure ASTMA193/A194 B5, B6, B6X, B7, B7M, B16, B8, B8C, B8M, B8P, B8T, B8LN, B8MLN, B8CLN, B8ML4CuN, 1, 2, 2H, 2HM, 3, 4, 4L, 6, 6F, 7, 7L, 7M, 8, 8C, 8M, 8T, 8F, 8P, 8N, 8MN, 8R, 8S, 8LN, 8MLN, 8MLCuN, 9C, 16