Unit:
毫米(mm) |
| ①,a≤4P ②, The shape of screw end shall be as rolled end for bolts with nominal screw thread of M8 or less and chamfered end or flat point for those with nominal screw thread of M10 or more. The as·rolled end shall ensure good leading into internal screw thread. When chamfered end or flat point is required for bolt with nominal screw thread of M8 or less, it shall be specified by the purchaser. |
Threaded Studs with Flange for Short-cycle Drawn Arc Stud Welding - PS Type Threaded Stud with Flanged
Suppliers(1)
Type U3 Projection Weld Studs
Type UR Projection Weld Studs
Type UC4 Projection Weld Studs
Type T3 Projection Weld Studs
Heavy Duty Type US3 Projection Welding Studs
Flat Round Head with Rings on Undertake Surface Welding Screws
Type TUS3 Projection Weld Studs
Type TD Projection Weld Studs
Weld Screws with Metric Thread
Weld Screws with Metric Thread
Studs for Stud Welding with Tip Ignition; Threaded Bolt
Flat Head Welding Screws
Weld Screws, Type A
Suppliers(1)
Weld Screws, Type B
Weld Screws, Type C
Suppliers(1)
Overhead Projection Weld Bolts - Type A
Overhead Projection Weld Bolts - Type B
Welding Screws for Plastic
Screws for Resistance Projection Welding [Table 1]
Flat Round Head Weld Screws
Spot Welding Stud (ANSI/ASME/IFI)
Weld Bolts, Type A
Overhead Projection Weld Bolts - Type A
Overhead Projection Weld Bolts - Type B
Welding Screws for Plastic
Weld Bolts, Type B
Weld Bolts, Type C
Overhead Projection Weld Bolts - Type B
Overhead Projection Weld Bolts - Type A
