D型導正銷 HB 858 - 1990
|
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
| ①,材料：T10A （GB 1298）；熱處理：52~56 HRC。 ②,技術條件按 HB 892-90。 |
注：技術數據僅供參考，請以官方原件為準！
類似标準及供貨信息
| 1 |
|
[國标] GB /T 13829.1 - 2004 |
槽銷 帶導杆及全長平行溝槽 Grooved Pin, Full Length Parallel Grooved With Pilot 供應商(2) |
| 2 |
|
[國标] GB /T 13829.2 - 2004 |
槽銷 帶倒角及全長平行溝槽 Grooved Pin, Full Length Parallel Grooved With Chamfer 供應商(3) |
| 3 |
|
[國标] GB /T 13829.3 - 2004 |
槽銷 中部槽長為1/3全長 Grooved pins-One-third-length centre grooved 供應商(3) |
| 4 |
|
[國标] GB /T 13829.4 - 2004 |
槽銷 中部槽長為1/2全長 Grooved Pins - Half-Length Centre Grooved 供應商(1) |
| 5 |
|
[國标] GB /T 13829.1 (A) - 1992 |
A型-帶導杆及全長平行溝槽的槽銷. Grooved pin, full length parallel grooved with pilot 供應商(2) |
| 6 |
|
[國标] GB /T 13829.1 (B) - 1992 |
B型-帶倒角及全長平行溝槽槽銷. Grooved Pins-Full-Length Parallel Grooved, With Chamferw 供應商(3) |
| 7 |
|
[國标] GB /T 13829.1 (C) - 1992 |
C型-中部帶1/3全長平行溝槽的槽銷 Grooved Pins-One-Third-Length Centre Grooved 供應商(3) |
| 8 |
|
[國标] GB /T 13829.1 (D) - 1992 |
D型中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-Length Centre Grooved 供應商(1) |
| 9 |
|
[德标] DIN 1469 - 2012 |
帶頸配合槽銷，溝槽長為全長1/2 Grooved Pins, Half Length Grooved With Gorge 供應商(1) |
| 10 |
|
[德标] DIN 1469 - 2011 |
帶頸配合槽銷 Grooved pins, Half length grooved with gorge 供應商(1) |
| 11 |
|
[德标] DIN 1469 - 1978 |
帶頸配合槽銷 Grooved Pins, Half Length Grooved With Gorge 供應商(1) |
| 12 |
|
[德标] DIN 1470 - 1978 |
帶導杆及全長平行溝槽的槽銷 Grooved pin, full length parallel grooved with pilot 供應商(1) |
| 13 |
|
[德标] DIN 1473 - 1978 |
帶倒角及全長平行溝槽的槽銷 Grooved Pins, Full Length Parallel Grooved With Chamfer 供應商(2) |
| 14 |
|
[德标] DIN 1475 - 1978 |
槽銷，中部槽長為1/3全長 Grooved pins - 1/3 Length Centre Grooved 供應商(3) |
| 15 |
|
[國際] ISO 8739 - 1997 |
槽銷—帶導杆及全長平行溝槽 Grooved Pins-Full-Length Parallel Grooved, With Pilot 供應商(1) |
| 16 |
|
[國際] ISO 8740 - 1997 |
帶倒角及全長平行溝槽槽銷 Grooved Pins-Full-Length Parallel Grooved, With Chamfer 供應商(2) |
| 17 |
|
[國際] ISO 8742 - 1997 |
中部帶1/3全長平行溝槽的槽銷 Grooved Pins-One-Third-Length Centre Grooved 供應商(1) |
| 18 |
|
[國際] ISO 8743 - 1997 |
中部帶1/2全長平行溝槽的槽銷 Grooved Pins-Half-Length Centre Grooved |
| 19 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制半長槽銷Table5 Grooved pins metric series with half-length grooved |
| 20 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制槽銷Table3 Metric grooved pins, full-length parallel grooved-metric series |
| 21 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制中部帶1/3全長溝槽的槽銷 Metric grooved pins with one third length groove in the middle |
| 22 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制中部帶1/2全長平行溝槽的槽銷 Metric grooved pins—half-length centre grooved |
| 23 |
|
[歐标] EN 28740 - 1992 |
槽銷 全長平行溝槽 帶倒角 Full-Length Parallel Grooved, with Chamfer |
| 24 |
|
[歐标] EN 28743 - 1992 |
中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-Length Centre Grooved |
| 25 |
|
[法國] NF E 25-750 - 1997 |
中部帶1/2全長平行溝槽的槽銷 Grooved Pins. Half Length Centre Grooved |
| 26 |
|
[法國] NF E 25-761 - 1997 |
槽銷 帶導向的全長平行槽 Grooved Pins — Full-length Parallel Grooved, With Pilot |
| 27 |
|
[法國] NF E 25-763 - 1997 (R2002) |
中部帶1/3全長平行溝槽的槽銷 Grooved Pins. One-Third-Length Centre Grooved |
| 28 |
|
[法國] NF E 25-772 - 1997 (R2002) |
帶倒角及全長平行溝槽的槽銷 Grooved Pins. Full Length Paralled Grooved, With Chamfer |
| 29 |
|
[美标] SAE J 494 (C) - 2004 |
C型 槽銷 Grooved Straight Pins - Type C |
| 30 |
|
[美标] SAE J 494 (E) - 2004 |
E型 槽銷 Grooved Straight Pins - Type E |
| 31 |
|
[美标] SAE J 494 (F) - 2004 |
F型 槽銷 Grooved Straight Pins - Type F |
| 32 |
|
[德标] DIN EN ISO 8739 - 1998 |
帶導杆及全長平行溝槽的槽銷 Grooved Pin, Full Length Parallel Grooved With Pilot 供應商(1) |
| 33 |
|
[德标] DIN EN ISO 8740 - 1998 |
帶倒角及全長平行溝槽的槽銷 Grooved Pins. Full-Length Parallel Grooved,With Chamfer 供應商(2) |
| 34 |
|
[德标] DIN EN ISO 8742 - 1998 |
槽銷，中部帶1/3全長平行溝槽 Grooved Pins - 1/3 Length Centre Grooved 供應商(3) |
| 35 |
|
[德标] DIN EN ISO 8743 - 1998 |
槽銷 中部槽長為1/2全長 Grooved Pins -- Half-Length Centre Grooved |
| 36 |
|
[歐标] EN ISO 8743 - 1997 |
中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-Length Centre Grooved |
| 37 |
|
[美标] ASME B 18.8.2 - 2020 |
F型全長槽銷 【Table 8 -1】 Grooved pins - Type F |
| 38 |
|
[美标] ASME B 18.8.2 - 2020 |
H型半長槽銷 【Table 8 -1】 Grooved Pins - Type H |
| 39 |
|
[美标] ASME B 18.8.2 - 2020 |
G型槽銷 【Table 8 -1】 Grooved Pins - Type G |
| 40 |
|
[美标] ASME B 18.8.2 - 2020 |
E型槽銷 半長錐槽 【Table 8 -1】 Grooved Pins - Type E |
| 41 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
G型槽銷 【Table 6】 Grooved Pins - Type G |
| 42 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
H型半長槽銷 【Table 6】 Grooved Pins - Type H |
| 43 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
E型槽銷 半長錐槽 【Table 6】 Grooved Pins - Type E |
| 44 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
F型全長槽銷 【Table6】 Grooved pins - Type F |
© 易緊通 服務熱線：4006-164580（免長途費）