選擇規格尺寸 點擊↓ M16 M20 (M22) M24 (M27) M30 括号内尺寸為非優選
|
尺寸單位:
mm |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
①,性能等級:10.9S; 推薦材料:20MnTiB(GB/T3077)、ML20MnTiB(GB/T6478),适用規格:≤M24; 35CrMo(GB/T3077)、35VB(化學成分%:C 0.31~0.37,Mn 0.50~0.90,Si 0.17~0.37, P ≤0.04, S ≤0.04, V 0.05~0.12, B 0.001~0.004, Cu ≤0.25),适用規格:M27、M30。 經供需雙方協議,也可使用其他材料,但應在訂貨合同中注明,并在螺栓產品上增加标志T(緊跟S或H)。 |
類似标準及供貨信息
1 | [國标] GB /T 3632 (S) - 1995 |
鋼結構用扭剪型高強度螺栓 Torshear type high strength bolt for steel structures 供應商(7) |
|
2 | [國标] GB /T 32076.8 - 2017 |
預載荷高強度栓接結構連接副:扭剪型圓頭螺栓 High-Strength Structural Bolting Assemblies For Preloading - Torshear Type Bolt With Cup Head |
|
3 | [歐标] EN 14399-10 (Cup Bolt) - 2018 |
預負載用高強度結構螺栓連接副,第10部分:HRC系統 - 扭剪型圓頭螺栓 High-Strength Structural Bolting Assemblies for Preloading - System HRC - Bolt HRC with Cup Head |
|
4 | [美标] ASME B 18.2.6 - 2019 |
扭剪型高強度螺栓 (平圓頭) (ASTM F3125 / F3125M) Twist-Off-Type Tension Control Structural Bolts: Heavy Round Head Configurations (ASTM F3125 / F3125M) |
|
5 | [美标] ASME B 18.2.6 - 2010 |
扭剪型高強度螺栓 (平圓頭) (ASTM F 1852 / ASTM F 2280) [Table 7] Twist-Off-Type Tension Control Structural Bolts: Heavy Round Head Configurations (ASTM F 1852 / ASTM F 2280) |
|
6 | [美标] ASME B 18.2.6 - 2006 |
鋼結構用扭剪型高強度螺栓 (ASTM F 1852 / ASTM F 2280) Steel structure with high strength round torsional shear bolt (ASTM F 1852 / ASTM F 2280) |
|
7 | [日标] JSS II 09 (-1) - 1996 |
結構連接用扭剪型高強螺栓 Torsional shear type high strength bolt for structural connection |