GB /T 10433 (SD) - 2024 Stud for Arc Stud Welding - Shear Connector - Type SD

Unit: 毫米(mm)

Nominal Diameter
d

d ^②	max
d ^②	min
d_c	Nominal Size
	max
	min
d₁ ^③	Ref.
h₃	Nominal Size
	max
	min
h ^③	Ref.
a	±7°
L₁	±1.5

8.4	10.4	13.4
7.6	9.6	12.6
16	18	22
16.3	18.3	22.3
15.7	17.7	21.7
11	13	17
7	7	8
8	8	9
6.5	6.5	7.5
2.5	2.5	3
140°	140°	140°
L2 +3	L2 +3	L2 +3

①,The minimum of L₂ is approximately three times d. is approximately three times d. (tolerance on L₂ is +1.5, -2 mm).
②,Excess diameter or production impressions in the shaft area below the head are permitted up to 0,5 mm, provided they do not affect proper plunge.
③,For special conditions, e.g. through-deck stud welding, the dimensions and the tolerances are not applicable.

GB /T 10433 (UD) - 2024

Stud for Arc Stud Welding - Unthreaded Stud - Type UD
Suppliers(1)

GB /T 10433 (UT) - 2024

Stud Welding with Tip Ignition - Unthreaded Stud - Type UT
Suppliers(1)

GB /T 10432.2 - 2016

Unthreaded Stud for Short-Cycle Drawn Arc Stud Welding
Suppliers(1)

GB /T 10432.1 - 2010

Unthreaded Sutds for Drawn Arc Stud Welding with Ceramic Ferrule - UD Type
Suppliers(1)

GB /T 10432.3 - 2010

Unthreaded Studs for Capacitor Discharge Welding - UT Type
Suppliers(1)

GB /T 10433 - 2002

Cheese Head Studs for Arc Stud Welding
Suppliers(1)

GB 10432 - 1989

Headless Studs for Stud Welding
Suppliers(1)

GB /T 10433 - 1989

Cheese Head Studs for Stud Welding
Suppliers(1)

GB /T 10433 (ND) - 2024

Stud for Arc Stud Welding - Insulation Pin/nail - Type ND

DIN 32500 (-2) - 1991

Studs for Drawn Arc Stud Welding - Unthreaded Studs, Ferrules (Z)

DIN 32501-2 (SA) - 1991

Studs for Stud Welding with Tip Lgnition; Unthreaded Studs

DIN 32500 (-4) - 1975

Studs for Drawn Arc Stud Welding - T-studs

ISO 13918 (UD) - 2017

Stud for Arc Stud Welding - Unthreaded Stud - Type UD

ISO 13918 (ND) - 2017

Stud for Arc Stud Welding - Insulation Pin/nail - Type ND

ISO 13918 (SD) - 2017

Stud for Arc Stud Welding - Shear Connector - Type SD

ISO 13918 (UT) - 2017

Stud Welding with Tip Ignition - Unthreaded Stud - Type UT

ISO 13918 (SD) - 1998

Shear Connectors(SD)

JIS B 1198 - 2011

Cheese Head Studs for Arc Stud Welding

JIS B 1198 - 1995

Cheese Head Studs for Welding

Q 529

QC /T 886 - 2011

Weld Studs for Arc Welding

Wuxi Zeke Hardware Manufacturing Co., Ltd.
Contact:	Mr.Chen
Cellphone：	+86-18651586798
QQ：	531792923
email：	wxzeke@163.com
Material: Zirconium Zr-1(R60700), Zr-3(R60702), Zr-5(R60705), Zr-0(R60001), Zr-2(R60802), Zr-4(R60804), Titanium TA1-TA36, TB2-TB17, TC1-TC32, Corrosion resistant alloy Incoloy 800, 800H, 800HT, 825, 925, Hastelloy B, B-2, B-3, B-4, C, C276, C-4, C-22, G-50, X, G, G-3, G-30, C-2000, Inconel600, 601, 690, 625, 622, 686, 718, 703, X750, Monel400, Monel K500, Pure nickel Nickel 200, Nickel 201, High-temperature alloy Nimonic 75, 80A, 90, 901, 20Cb-3 alloy, A286(Gr660), Cr20Ni80, Super stainless steel XM-19, 254SMO(F44), 1.4529, 25-6MO, 303, 304, 304L, 309, 309L, 310, 310S, 316, 316L, 316Ti, 904L, 317, 317L, 321, 347, Duplex stainless steel 2205(F51、F60), 2507(F53), S32760(F55), 1Cr13, 2Cr13, 3Cr13, 630(17-4PH), 631(17-7PH), 660, Grade: 8.8, 10.9, 12.9, 14.9, A2-70, A2-80, A3-70, A3-80, A4-70, A4-80, A4L-80, A5-80, D2-70, D2-80, D2-100, D4-70, D4-80, D4-100, D6-70, D6-80, D6-100, D8-70, D8-80, D8-100, C1-70, C1-110, C4-70, C3-80, F1-45, F1-60 High temperature and high pressure ASTMA193/A194 B5, B6, B6X, B7, B7M, B16, B8, B8C, B8M, B8P, B8T, B8LN, B8MLN, B8CLN, B8ML4CuN, 1, 2, 2H, 2HM, 3, 4, 4L, 6, 6F, 7, 7L, 7M, 8, 8C, 8M, 8T, 8F, 8P, 8N, 8MN, 8R, 8S, 8LN, 8MLN, 8MLCuN, 9C, 16