ASME B 18.6.2 (T3-Flat) - 2020 Slotted Set Screws with Flat Point (A307, SAE J429, F468, F593)

Unit:

Thread Size
d

0#
0.0600

1#
0.0730

2#
0.0860

β ^②
n	max
	min
t	max
	min
d_p	max
	min
Y ^①

0.060	0.073	0.086
0.014	0.016	0.018
0.010	0.012	0.014
0.020	0.020	0.025
0.016	0.016	0.019
0.033	0.040	0.047
0.027	0.033	0.039
5/64	3/32	7/64

①,Point angle α shall be 45 deg. plus 5 deg., minus 0 deg. for screws of nominal lengths equal to or longer than those listed for variable Y, and 30 deg. minimum for screws of shorter nominal lengths.
②,Tolerance on radius for nominal sizes up to and including 5 (0.125 in.) shall be +0.015 in., -0.000 and for larger sizes, +0.031 in., -0.000. Slotted ends on screws may be flat at the option of the manufacturer.
③,When specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.

GB /T 73 - 2017

Slotted Set Screws with Flat Point
Suppliers(1)

GB /T 73 - 1985

Slotted Set Screws with Flat Point
Suppliers(1)

DIN 551 - 1986

Slotted Set Screws with Flat Point

ISO 4766 - 2024

Slotted Set Screws with Flat Point

ISO 4766 - 2011

Slotted Set Screws With Flat Point

ISO 4766 - 1983

Slotted set screws with flat point

JIS B 1117 (T2) - 2010

Slotted Set Screws with Flat Point

JIS B 1117 (T1) - 1995

Slotted screws with flat point

Q 282

Slotted Flat Point Set Screws

ASME/ANSI B 18.6.2 (T5-flat) - 1998 (R2010)

Slotted Set Screws with Flat Point [Table 5] (A307, SAE J429, F468, F593)

EN 24766 - 1992

Slotted Set Screws with Flat Point

NF E 25-160 - 1992 (R2002)

Slotted Set Screws with Flat Point

CNS 4478 - 1981

Slotted Set Screws with Flat Point

DIN EN 24766 - 1992

Slotted Set Screws with Flat Point

QJ 2375 - 1992

Slotted Set Screws with Flat Point